What is a Factory Three Leaf Roots Blower? Roots Blower specifications, models, and parameters

Factory Three Leaf Roots Bloweris a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.。The following is to introduce the Factory Three Leaf Roots Blower:

1、Brief introduction of Factory Three Leaf Roots Blower

Factory Three Leaf Roots Blowerthe models are complete and can meet the needs of different users for different purposes.，widely used inmanufacturing industry,pottery and porcelain,mine,power,building materials and other industries，it mainly includes bearing, case, muffler, fuel tank and impeller，Factory Three Leaf Roots BlowerThe structural design is simple, novel and special.。

Factory Three Leaf Roots Blower

2、Factory Three Leaf Roots Blower principle

Factory Three Leaf Roots Blowerat runtime,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，The structure is novel, special, advanced, reasonable and scientific.，generally, it is composed of wallboard, bearing, wallboard, impeller, rotator and other major components。

Factory Three Leaf Roots Blower

3、Factory Three Leaf Roots Blower characteristics

Factory Three Leaf Roots Blowerstable and reliable,convenient maintenance,strong adaptability,Precise control,be of simple construction，It has a wide range of uses, and is often used indehydrate,pick up the suction,Desulfurization oxidation,dry,supply air and so on，the principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.。

Factory Three Leaf Roots Blower

4、Factory Three Leaf Roots Blower field real shot

the product looks beautiful., advanced technology, complete specifications and models。

Factory Three Leaf Roots Blower

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Factory Three Leaf Roots Blower structure

The Factory Three Leaf Roots Blower structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Factory Three Leaf Roots Blower enters and exits.

2. impeller

It is the rotating part of the Factory Three Leaf Roots Blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Factory Three Leaf Roots Blower has gradually replaced the two-leaf Factory Three Leaf Roots Blower.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Factory Three Leaf Roots Blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Factory Three Leaf Roots Blower

Factory Three Leaf Roots Blowerit is widely used inpetrochemical industry,power,make paper,chemical fertilizer,pneumatic transport and other industries，the product looks atmospheric.，features include durable performance, convenient manufacture, durable performance, be of simple construction and convenient maintenance。