Introduction to Roots blower in printing and dyeing factory and Three leaf Roots blower structure principle

Roots blower in printing and dyeing factoryis a positive displacement blower with forced gas transmission characteristics.，the product looks beautiful.，it has the characteristics of smooth operation, run smoothly, wide application range, be of simple construction and durable performance。The following is to introduce the Roots blower in printing and dyeing factory:

1、Brief introduction of Roots blower in printing and dyeing factory

Roots blower in printing and dyeing factoryis an efficient volumetric gas conveying and pressurizing equipment.，it is widely used in coal chemical industry, chemical fertilizer, Food and beverage processing, manufacturing industry and petrify，is based on hyde powder is carefully developed by hyde combined with advanced technology。

Roots blower in printing and dyeing factory

2、Advantages of Roots blower in printing and dyeing factory principle

Roots blower in printing and dyeing factorythe principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.，it can be used in power, pneumatic transport, sewage disposal, smelt, make paper and other industries，is a Roots blower in printing and dyeing factory newly developed by hyde powder。

Roots blower in printing and dyeing factory

3、Structural characteristics of Roots blower in printing and dyeing factory

The Roots blower in printing and dyeing factory structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower in printing and dyeing factory, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower in printing and dyeing factory enters and exits.

Roots blower in printing and dyeing factory

4、Roots blower in printing and dyeing factory function

Roots blower in printing and dyeing factoryit has the functions of material fluidization, mix, ventilation, pressurized transportation and material handling，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Roots blower in printing and dyeing factory perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower in printing and dyeing factory less vibration and noise.、Due to the adoption of synchronous gear transmission and small gap design, the Roots blower in printing and dyeing factory runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、In the process of air intake and exhaust, the Roots blower in printing and dyeing factory will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，The price is more affordable，reliable quality。

Roots blower in printing and dyeing factory

5、Roots blower in printing and dyeing factory application

Roots blower in printing and dyeing factoryIt has a wide range of uses, and is often used inpick up the suction,Desulfurization oxidation,aeration,mix,dehydrate and so on，widely used inport,mine,water treatment,Environmental protection industry,Food and beverage processing and other industries。

Roots blower in printing and dyeing factory

Roots blower in printing and dyeing factoryin the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes rotator, bearing, impeller, wallboard and case，is a Roots blower in printing and dyeing factory。