What is a Roots blower for exhaust gas treatment? Introduction to the advantages and characteristics of the Three leaf Roots blower

Roots blower for exhaust gas treatmentis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the main features are wide application range, smooth operation, economical and durable, durable performance and be of simple construction，is developed and improved by hyde powder。The following is to introduce the Roots blower for exhaust gas treatment:

1、Brief introduction of Roots blower for exhaust gas treatment

Roots blower for exhaust gas treatmenta rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

Roots blower for exhaust gas treatment

2、Roots blower for exhaust gas treatment video detail

You can buy Roots blower for exhaust gas treatment according to your needs and show you Roots blower for exhaust gas treatment videos.。

Roots blower for exhaust gas treatment

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. at work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。

3、Roots blower for exhaust gas treatment performance advantage

Roots blower for exhaust gas treatments have the following advantages.

1. Long service life

The mechanical friction of the Roots blower for exhaust gas treatment is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

2. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

3. Strong adaptability

Roots blower for exhaust gas treatments are suitable for many purposes and have been widely used in various fields.

4. Long service life

The mechanical friction of the Roots blower for exhaust gas treatment is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

5. Simple structure and convenient manufacture

The Roots blower for exhaust gas treatment is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

Roots blower for exhaust gas treatment

4、Roots blower for exhaust gas treatment function

Roots blower for exhaust gas treatmentmultifunctional, with functions such as mix, pressurized transportation, desulfurization oxidation, dehydrate and supply air，The structural design is simple, novel and special.，it is mainly composed of rotator, wallboard, case, bearing and fuel tank，is a common Roots blower for exhaust gas treatment，it is an ideal choice for customers to buy Roots blower for exhaust gas treatment。

Roots blower for exhaust gas treatment

5、Structural characteristics of Roots blower for exhaust gas treatment

The Roots blower for exhaust gas treatment has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower for exhaust gas treatment enters and exits.

3. impeller

It is the rotating part of the Roots blower for exhaust gas treatment, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Roots blower for exhaust gas treatment has gradually replaced the two-leaf Roots blower for exhaust gas treatment.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for exhaust gas treatment, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower for exhaust gas treatment enters and exits.

Roots blower for exhaust gas treatment

6、How much is the Roots blower for exhaust gas treatment?

The Roots blower for exhaust gas treatment price is introduced as follows:

1. market supply and demand

If there is a large demand for Roots blower for exhaust gas treatment in the market, the price of Roots blower for exhaust gas treatment will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

2. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Roots blower for exhaust gas treatment are closely related. hyde has comprehensively measured the configuration and sales price of products when designing Roots blower for exhaust gas treatment, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. Manufacturer's strength

Our factory is a direct selling manufacturer of Roots blower for exhaust gas treatment, with independent production and processing facilities, few circulation links and low circulation cost.

5. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Roots blower for exhaust gas treatment

Roots blower for exhaust gas treatmentis a double impeller synchronous compression machine, belonging to a positive displacement blower.，the principle is simple.It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，the product looks atmospheric.。