Introduction to ROOTS VACUUM PUMP, how much is the price of the Roots Blower?

ROOTS VACUUM PUMPis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the principle is simple.Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder.，Due to the adoption of synchronous gear transmission and small gap design, the ROOTS VACUUM PUMP runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Because of the design of three-blade rotor, the ROOTS VACUUM PUMP has little vibration and low noise during operation, and the operation is stable and reliable、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the ROOTS VACUUM PUMP less vibration and noise.。

1、Brief introduction of ROOTS VACUUM PUMP

ROOTS VACUUM PUMPis an efficient volumetric gas conveying and pressurizing equipment.。

ROOTS VACUUM PUMP

2、ROOTS VACUUM PUMP HD real shot

You can buy ROOTS VACUUM PUMP according to your needs and show you product videos.。

ROOTS VACUUM PUMP

As you can see from the live video.，hyde powder Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.。

3、ROOTS VACUUM PUMP HD real shot

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

ROOTS VACUUM PUMP

Note: All the pictures in this article were taken by hyde manufacturer.。

4、ROOTS VACUUM PUMP structure

The ROOTS VACUUM PUMP structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the ROOTS VACUUM PUMP, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the ROOTS VACUUM PUMP, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. impeller

It is the rotating part of the ROOTS VACUUM PUMP, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf ROOTS VACUUM PUMP has gradually replaced the two-leaf ROOTS VACUUM PUMP.

ROOTS VACUUM PUMP

5、ROOTS VACUUM PUMP advantage

The advantages of ROOTS VACUUM PUMP are as follows:

1. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

2. Simple structure and convenient manufacture

The ROOTS VACUUM PUMP is simple in design and easy to manufacture and maintain.

3. Run smoothly

Due to the adoption of synchronous gear transmission and small gap design, the ROOTS VACUUM PUMP runs stably and reliably, without contact and wear parts, and has a long service life.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. energy-efficient

The ROOTS VACUUM PUMP has high efficiency and can realize gas transportation and pressurization with low energy consumption.

ROOTS VACUUM PUMP

ROOTS VACUUM PUMPis a ROOTS VACUUM PUMP，it has the functions of ventilation, exhaust emission, dry, material handling and mix，It has the functions of pick up the suction, dry, cool, material handling and Pressurized transportation。