Introduction to HDSR250V Three Leaf Roots Vacuum Pump, advantages, characteristics and principles of blower

HDSR250V Three Leaf Roots Vacuum Pumpis a double impeller synchronous compression machine, belonging to a positive displacement blower.。The following is to introduce the HDSR250V Three Leaf Roots Vacuum Pump:

1、Brief introduction of HDSR250V Three Leaf Roots Vacuum Pump

HDSR250V Three Leaf Roots Vacuum Pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，it is mainly composed of rotator, muffler, case, impeller and wallboard，This productThe structure is novel, special, advanced, reasonable and scientific.。

HDSR250V Three Leaf Roots Vacuum Pump

2、HDSR250V Three Leaf Roots Vacuum Pump video detail

You can buy HDSR250V Three Leaf Roots Vacuum Pump according to your needs and show you HDSR250V Three Leaf Roots Vacuum Pump videos.。

HDSR250V Three Leaf Roots Vacuum Pump

As you can see from the live video.，hyde When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

3、HDSR250V Three Leaf Roots Vacuum Pump structure composition

The HDSR250V Three Leaf Roots Vacuum Pump has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the HDSR250V Three Leaf Roots Vacuum Pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. impeller

It is the rotating part of the HDSR250V Three Leaf Roots Vacuum Pump, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf HDSR250V Three Leaf Roots Vacuum Pump has gradually replaced the two-leaf HDSR250V Three Leaf Roots Vacuum Pump.

5. muffler

Used to reduce the noise caused by airflow pulsation when the HDSR250V Three Leaf Roots Vacuum Pump enters and exits.

HDSR250V Three Leaf Roots Vacuum Pump

4、Introduction of HDSR250V Three Leaf Roots Vacuum Pump characteristics

HDSR250V Three Leaf Roots Vacuum Pumpit has the characteristics of be of simple construction, wide application range, convenient maintenance, stable and reliable and Precise control，Commonly used inaeration,material handling,dehydrate,Material fluidization,aquaculture and so on，it is an ideal choice for customers to buy HDSR250V Three Leaf Roots Vacuum Pump。

HDSR250V Three Leaf Roots Vacuum Pump

5、HDSR250V Three Leaf Roots Vacuum Pump customer scene picture

The HDSR250V Three Leaf Roots Vacuum Pump has a beautiful appearance and atmosphere for our customers' reference.。

HDSR250V Three Leaf Roots Vacuum Pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

HDSR250V Three Leaf Roots Vacuum Pumpis a common HDSR250V Three Leaf Roots Vacuum Pump，Mainly used forexhaust emission,mix,supply air,Pressurized transportation andVentilation，the product looks atmospheric.。