Introduction to Water cooled three blade Roots vacuum pump, how much is the price of the Roots Blower?

Water cooled three blade Roots vacuum pumpis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，is carefully developed by hyde combined with advanced technology。

1、Brief introduction of Water cooled three blade Roots vacuum pump

Water cooled three blade Roots vacuum pumpis a double impeller synchronous compression machine, belonging to a positive displacement blower.，the main structure includes case, muffler, wallboard, fuel tank, fuel tank and so on，super quality and competitive price。

Water cooled three blade Roots vacuum pump

2、Water cooled three blade Roots vacuum pump structure composition

The Water cooled three blade Roots vacuum pump has the following structure

1. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

2. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

3. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Water cooled three blade Roots vacuum pump enters and exits.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Water cooled three blade Roots vacuum pump

3、Water cooled three blade Roots vacuum pump HD real picture

The omni-directional high-definition real shot of the Water cooled three blade Roots vacuum pump is shown as follows to meet the purchase needs of our customers.。

Water cooled three blade Roots vacuum pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Introduction of Water cooled three blade Roots vacuum pump characteristics

Water cooled three blade Roots vacuum pumpfeatures include economical and durable, Precise control, be of simple construction, convenient manufacture and wide application range，Widely used in supply air, mix, aquaculture, aquaculture and dehydrate，it is an ideal choice for customers to buy Water cooled three blade Roots vacuum pump。

Water cooled three blade Roots vacuum pump

5、Introduction of advantages of Water cooled three blade Roots vacuum pump

Water cooled three blade Roots vacuum pumps have the following advantages.

1. Convenient maintenance

The structure of the Water cooled three blade Roots vacuum pump is relatively simple and easy to maintain.

2. energy-efficient

The Water cooled three blade Roots vacuum pump has high efficiency and can realize gas transportation and pressurization with low energy consumption.

3. Wide application range

Widely used in many fields, such as commodity industry, etc., it is more suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

4. Compact structure and small floor space.

The Water cooled three blade Roots vacuum pump is simple in design and easy to manufacture and maintain.

5. Long service life

The mechanical friction of the Water cooled three blade Roots vacuum pump is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Water cooled three blade Roots vacuum pump

6、How much is the Water cooled three blade Roots vacuum pump?

The Water cooled three blade Roots vacuum pump price is introduced as follows:

1. Configuration level

Products of the same style, different configurations, the product price is definitely different, therefore, the Water cooled three blade Roots vacuum pump price is affected by the configuration, and the price varies.

2. cost of production

Cost is a direct and fundamental factor that affects the price of Water cooled three blade Roots vacuum pump. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Water cooled three blade Roots vacuum pump price, low in cost and low in price.

3. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

4. product model

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Water cooled three blade Roots vacuum pump

Water cooled three blade Roots vacuum pumpit is widely used inmine,petrify,aquaculture,Food and beverage processing,Textile light textile and other industries，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Water cooled three blade Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Water cooled three blade Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Water cooled three blade Roots vacuum pump less vibration and noise.。