Introduction to Teflon anti-corrosion Roots vacuum pump system and Three leaf Roots blower advantages and features

Teflon anti-corrosion Roots vacuum pump systemis a positive displacement blower with forced gas transmission characteristics.，It can be used for Desulfurization oxidation, Pressurized transportation, Ventilation, pick up the suction, supply air, cool and so on。The following is to introduce the Teflon anti-corrosion Roots vacuum pump system:

1、Brief introduction of Teflon anti-corrosion Roots vacuum pump system

Teflon anti-corrosion Roots vacuum pump systemis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the main features are stable and reliable, low noise, wide application range, run smoothly and durable performance，multifunctional, with functions such as material fluidization, dry, supply air, aeration and cool，the product looks atmospheric.，the main structure includes wallboard, bearing, impeller, fuel tank, bearing and so on，Teflon anti-corrosion Roots vacuum pump systemSimple structure and advanced technology.。

Teflon anti-corrosion Roots vacuum pump system

2、Teflon anti-corrosion Roots vacuum pump system real shot picture

hyde Teflon anti-corrosion Roots vacuum pump system is completely upgraded, savoring the beauty of details.。

Teflon anti-corrosion Roots vacuum pump system

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Teflon anti-corrosion Roots vacuum pump system structure

The Teflon anti-corrosion Roots vacuum pump system structure is introduced as follows:

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. muffler

Used to reduce the noise caused by airflow pulsation when the Teflon anti-corrosion Roots vacuum pump system enters and exits.

3. impeller

It is the rotating part of the Teflon anti-corrosion Roots vacuum pump system, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Teflon anti-corrosion Roots vacuum pump system has gradually replaced the two-leaf Teflon anti-corrosion Roots vacuum pump system.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

Teflon anti-corrosion Roots vacuum pump system

4、Teflon anti-corrosion Roots vacuum pump system use

Teflon anti-corrosion Roots vacuum pump systemCommonly used inmaterial handling,aquaculture,dry,aeration,sewage disposal and so on。

Teflon anti-corrosion Roots vacuum pump system

5、Teflon anti-corrosion Roots vacuum pump system HD real shot

The omni-directional high-definition real shot of the Teflon anti-corrosion Roots vacuum pump system is shown as follows to meet the purchase needs of our customers.。

Teflon anti-corrosion Roots vacuum pump system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Structural advantages of Teflon anti-corrosion Roots vacuum pump system

The Teflon anti-corrosion Roots vacuum pump system has the following structure

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Teflon anti-corrosion Roots vacuum pump system, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. impeller

It is the rotating part of the Teflon anti-corrosion Roots vacuum pump system, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Teflon anti-corrosion Roots vacuum pump system has gradually replaced the two-leaf Teflon anti-corrosion Roots vacuum pump system.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Teflon anti-corrosion Roots vacuum pump system enters and exits.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Teflon anti-corrosion Roots vacuum pump system

Teflon anti-corrosion Roots vacuum pump systemIt has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Due to the adoption of synchronous gear transmission and small gap design, the Teflon anti-corrosion Roots vacuum pump system runs stably and reliably, without contact and wear parts, and has a long service life.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、Small size and small floor space make it easy to arrange and install in places with limited space.、Because of the design of three-blade rotor, the Teflon anti-corrosion Roots vacuum pump system has little vibration and low noise during operation, and the operation is stable and reliable，is a common Teflon anti-corrosion Roots vacuum pump system，the product looks atmospheric.。