Introduction to Anti-corrosion Roots vacuum pump, introduction to the roots vacuum pump advantages and characteristics

Anti-corrosion Roots vacuum pumpis a vacuum pump that sucks air through a pair of rotors making relative rotary motion in the pump cavity.，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Anti-corrosion Roots vacuum pump less vibration and noise.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Anti-corrosion Roots vacuum pump perform well in many situations where stable airflow is needed.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Small size and small floor space make it easy to arrange and install in places with limited space.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.，is an advanced Anti-corrosion Roots vacuum pump developed by our company in combination with the actual situation of the industry。The following is to introduce the Anti-corrosion Roots vacuum pump:

1、Brief introduction of Anti-corrosion Roots vacuum pump

Anti-corrosion Roots vacuum pumpis a kind of vacuum equipment that uses a pair of rotors (usually two impellers with special profile) that rotate synchronously and reversely in the pump cavity to extract gas.。

Anti-corrosion Roots vacuum pump

2、Anti-corrosion Roots vacuum pump principle

Anti-corrosion Roots vacuum pumpmainly based on the relative rotational movement of the rotor in the pump chamber. There are two rotors in the pump, and a certain gap is kept between them and the inner wall of the pump shell. Through the rotation of the rotor, the gas is sucked in from the air inlet, and then discharged from the air outlet through the processes of compression and exhaust. Due to the special design of the rotor profile, the gas in the pump cavity is effectively compressed and discharged, thus achieving vacuum extraction.，is a Anti-corrosion Roots vacuum pump，is a vacuum pump that sucks air through a pair of rotors making relative rotary motion in the pump cavity.，support customization。

Anti-corrosion Roots vacuum pump

3、Physical picture of Anti-corrosion Roots vacuum pump

High-definition map of Anti-corrosion Roots vacuum pump is displayed, and the high-definition map of factory area is taken by hyde powder for reference of our customers.。

Anti-corrosion Roots vacuum pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

4、Structural advantages of Anti-corrosion Roots vacuum pump

The Anti-corrosion Roots vacuum pump has the following structure

1. gearing

The transmission device is usually driven by motor or reducer, which makes the rotor rotate relatively in the pump cavity.

2. pump body

Pump body is usually made of cast iron or cast steel, which has good strength and sealing performance.

3. bearing

Bearings are responsible for supporting the rotary motion of the rotor, and high-precision bearings are usually used to ensure the stable operation of the rotor.

4. rotator

Rotor is the core component of the Anti-corrosion Roots vacuum pump, and its profile design and machining accuracy directly affect the performance and service life of the pump.

5. sealing device

The sealing device is used to ensure that the gas in the pump cavity will not leak to the external environment.

Anti-corrosion Roots vacuum pump

5、Anti-corrosion Roots vacuum pump advantage

The advantages of Anti-corrosion Roots vacuum pump are as follows:

1. Long service life

The rotor of the Anti-corrosion Roots vacuum pump is usually made of wear-resistant materials, and the structure of the pump body is firm, so the service life is relatively long.

2. be of simple construction

The structure of the Anti-corrosion Roots vacuum pump is relatively simple, mainly composed of pump body and other parts.

3. High pumping efficiency

Due to the relative motion between the rotors, the Anti-corrosion Roots vacuum pump can compress and exhaust gas efficiently in the process of air extraction, thus improving the air extraction efficiency.

4. Wide application range

Anti-corrosion Roots vacuum pumps are suitable for many industries, such as manufacturing industry and other fields, and are used in various technological processes such as vacuum distillation, drying, purification, pumping and vacuum packaging.

5. stability

The structure is simple and practical, and there is no need to refuel, so it has little impact on the environment and gas pollution. In addition, because the rotor adopts a trilobal shape, the vibration and noise generated by its movement are very small and the operation is stable.

Anti-corrosion Roots vacuum pump

Anti-corrosion Roots vacuum pumpthe product looks beautiful.，it is widely used inFood and beverage processing,building materials,pottery and porcelain,mine,sewage disposal and other industries，is a common vacuum equipment.。