Introduction to Three-leaf Roots vacuum pump for food packaging, the roots vacuum pump specifications, model parameters

Three-leaf Roots vacuum pump for food packagingis a common vacuum equipment.，It has a wide range of uses, and is often used invacuum packaging,vacuum drying,Vacuum extraction,Vacuum extraction,vacuum drying and so on。

1、Brief introduction of Three-leaf Roots vacuum pump for food packaging

Three-leaf Roots vacuum pump for food packagingis an efficient and reliable vacuum equipment.。

Three-leaf Roots vacuum pump for food packaging

2、Three-leaf Roots vacuum pump for food packaging use

Three-leaf Roots vacuum pump for food packagingWidely used invacuum distillation,vacuum treatment,Gas treatment,vacuum packaging,Vacuum extraction and so on，is a Three-leaf Roots vacuum pump for food packaging，the suction, compression and exhaust processes are completed by synchronous high-speed rotation of two or more trilobal rotors in the pump cavity. The rotor consists of three blades, whose shapes and positions are symmetrical. When the motor is started, the two rotors start to rotate. Due to the symmetry of the design and position of the blades, air enters the pump body from the air inlet, and is gradually squeezed and discharged by the blades, forming a vacuum.。

Three-leaf Roots vacuum pump for food packaging

3、Structural advantages of Three-leaf Roots vacuum pump for food packaging

The Three-leaf Roots vacuum pump for food packaging has the following structure

1. sealing device

The sealing device is used to ensure that the gas in the pump cavity will not leak to the external environment.

2. rotator

Rotor is the core component of the Three-leaf Roots vacuum pump for food packaging, and its profile design and machining accuracy directly affect the performance and service life of the pump.

3. gearing

The transmission device is usually driven by motor or reducer, which makes the rotor rotate relatively in the pump cavity.

4. bearing

Bearings are responsible for supporting the rotary motion of the rotor, and high-precision bearings are usually used to ensure the stable operation of the rotor.

5. pump body

Pump body is usually made of cast iron or cast steel, which has good strength and sealing performance.

Three-leaf Roots vacuum pump for food packaging

4、Introduction of Three-leaf Roots vacuum pump for food packaging characteristics

Three-leaf Roots vacuum pump for food packagingbe of simple construction,Long service life,Low noise,High pumping efficiency,Fan vibration is small.，it is widely used inpottery and porcelain,Environmental protection industry,water treatment,manufacturing industry,pneumatic transport and other industries，in the course of work,mainly based on the relative rotational movement of the rotor in the pump chamber. There are two rotors in the pump, and a certain gap is kept between them and the inner wall of the pump shell. Through the rotation of the rotor, the gas is sucked in from the air inlet, and then discharged from the air outlet through the processes of compression and exhaust. Due to the special design of the rotor profile, the gas in the pump cavity is effectively compressed and discharged, thus achieving vacuum extraction.，the product looks beautiful.，reliable quality，low in price。

Three-leaf Roots vacuum pump for food packaging

5、Three-leaf Roots vacuum pump for food packaging HD picture real shot

hyde powder Three-leaf Roots vacuum pump for food packaging is completely upgraded, savoring the beauty of details.。

Three-leaf Roots vacuum pump for food packaging

Note: All the pictures in this article were taken by hyde manufacturer.。

Three-leaf Roots vacuum pump for food packagingis a kind of high quality and low price Three-leaf Roots vacuum pump for food packaging，the product looks beautiful.。