What is a Polycarbonate pneumatic conveying equipment?

Polycarbonate pneumatic conveying equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.。

1、Brief introduction of Polycarbonate pneumatic conveying equipment

Polycarbonate pneumatic conveying equipmentis a reliable material conveying system for conveying powdery materials under high pressure.，the advantage is In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、Materials are transported in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point discharging, and realize long-distance operation.。

Polycarbonate pneumatic conveying equipment

2、Polycarbonate pneumatic conveying equipment structure

The Polycarbonate pneumatic conveying equipment structure is introduced as follows:

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Polycarbonate pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Polycarbonate pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Polycarbonate pneumatic conveying equipment

3、Introduction of advantages of Polycarbonate pneumatic conveying equipment

The advantages of Polycarbonate pneumatic conveying equipment are as follows:

1. Easy to maintain

Although the initial investment of Polycarbonate pneumatic conveying equipment system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

2. High conveying efficiency and low cost.

The Polycarbonate pneumatic conveying equipment can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

3. Strong sealing

The pipeline layout of the Polycarbonate pneumatic conveying equipment is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Polycarbonate pneumatic conveying equipment system to adapt to various complex production environments and meet different production needs.

4. Low maintenance cost

The Polycarbonate pneumatic conveying equipment device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

5. energy saving and environmental protection

The conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and escaping, reduces environmental pollution, improves the working environment and is conducive to protecting the health of production personnel.

Polycarbonate pneumatic conveying equipment

4、Polycarbonate pneumatic conveying equipment application

Polycarbonate pneumatic conveying equipments have the following purposes.

1. Mixing and classification

In the process of conveying, the Polycarbonate pneumatic conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. save energy and cut emissions

Although the Polycarbonate pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. material handling

Polycarbonate pneumatic conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Process assistance

In some production processes, Polycarbonate pneumatic conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Polycarbonate pneumatic conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

5. Environmental protection and cleaner production

The Polycarbonate pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Polycarbonate pneumatic conveying equipment

5、Polycarbonate pneumatic conveying equipment quotation

The Polycarbonate pneumatic conveying equipment price is introduced as follows:

1. Parameter size

Specifications and models have a great influence on the price of Polycarbonate pneumatic conveying equipment, so different specifications and models have different selling prices. Customers can reasonably select product specifications and models according to their own needs, so that products can meet their own required standards in terms of specifications and prices.

2. Brand strength

At present, there are various brands of Polycarbonate pneumatic conveying equipment in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Polycarbonate pneumatic conveying equipment are different.

3. product costs

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

4. market supply and demand

The difference between the supply and demand of manufacturers and customers will also affect the Polycarbonate pneumatic conveying equipment price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Polycarbonate pneumatic conveying equipment price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Polycarbonate pneumatic conveying equipment price will decrease.

5. Quality advantages and disadvantages

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Polycarbonate pneumatic conveying equipment, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

Polycarbonate pneumatic conveying equipment

6、Brief introduction of hyde

hyde has many years of experience in Polycarbonate pneumatic conveying equipment production, and is a professional Polycarbonate pneumatic conveying equipment manufacturer. With favorable Polycarbonate pneumatic conveying equipment price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Polycarbonate pneumatic conveying equipment manufacturer in jinan.。

hyde

Polycarbonate pneumatic conveying equipmentfeatures include Various processes, easy installation, Flexible layout, Convenient maintenance and Flexible transmission line，the main structure includes control system, delivery system, dust pelletizing system, Conveying pipeline system, dust pelletizing system and so on，productThe overall structural design is relatively simple。