What is a Coal slag particle transportation? Introduction to the Working Principle of pneumatic conveying

Coal slag particle transportationis a process of transporting bulk materials from one or more sources to one or more destinations by using airflow as a transport medium.，it is an ideal choice for customers to buy Coal slag particle transportation。

1、Brief introduction of Coal slag particle transportation

Coal slag particle transportationis a conveying system that uses airflow to convey powder and granular materials.。

Coal slag particle transportation

2、Coal slag particle transportation application

Coal slag particle transportations have the following purposes.

1. Multi-point transportation

The Coal slag particle transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Long distance transportation

The Coal slag particle transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. material handling

Coal slag particle transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Reduce pollution

The Coal slag particle transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

5. Process assistance

In some production processes, Coal slag particle transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Coal slag particle transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Coal slag particle transportation

3、Coal slag particle transportation video

You can buy Coal slag particle transportation according to your needs and show you product videos.。

Coal slag particle transportation

As you can see from the live video.，hyde Mainly used forReduce pollution,material handling,Bulk material transportation,Heating, cooling and drying andMulti-point transportation。

4、Functional advantages of Coal slag particle transportation

Coal slag particle transportations have the following advantages.

1. Save space

Coal slag particle transportation equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

2. Multi-point to multi-point transportation

The Coal slag particle transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Easy to maintain

Although the initial investment of Coal slag particle transportation system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

4. Small floor space

Compared with the traditional mechanical conveying mode, the Coal slag particle transportation system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

5. Low maintenance cost

The Coal slag particle transportation device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

Coal slag particle transportation

5、Structural advantages of Coal slag particle transportation

The Coal slag particle transportation has the following structure

1. control system

The control system is the "brain" of the Coal slag particle transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Coal slag particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Coal slag particle transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Coal slag particle transportation

6、Coal slag particle transportation HD real shot

Coal slag particle transportation specifications and models, novel design, beautiful appearance, for our customers to visit.。

Coal slag particle transportation

Note: All the pictures in this article were taken by hyde powder manufacturer.。

Coal slag particle transportationthe advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、The whole conveying process is sealed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.，in the course of work,Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。