Introduction to Pneumatic conveying of metal particles, introduction to Material conveying advantages and characteristics

Pneumatic conveying of metal particlesis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，multifunctional, with functions such as Explosion-proof involves, Closed conveying, Automatic control, Explosion-proof involves and Environmental protection and pollution-free，it has the structure of Bunker system, control system, delivery system, Air source system and control system。

1、Brief introduction of Pneumatic conveying of metal particles

Pneumatic conveying of metal particlesis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.。

Pneumatic conveying of metal particles

2、Pneumatic conveying of metal particles picture

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Pneumatic conveying of metal particles

Note: All the pictures in this article were taken by hyde powder manufacturer.。

3、Pneumatic conveying of metal particles characteristics

Pneumatic conveying of metal particlesthe main features are High system reliability, Large conveying capacity, Efficient and flexible, Quantitative transportation and Fast conveying speed。

Pneumatic conveying of metal particles

4、Structural advantages of Pneumatic conveying of metal particles

The Pneumatic conveying of metal particles structure is introduced as follows:

1. Air source device

The air source device is the power core of the Pneumatic conveying of metal particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Pneumatic conveying of metal particles system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Air source device

The air source device is the power core of the Pneumatic conveying of metal particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Pneumatic conveying of metal particles system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Pneumatic conveying of metal particles

5、Advantages of Pneumatic conveying of metal particles principle

Pneumatic conveying of metal particlesat runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，the advantage is It is suitable for centralized transportation to one place, and the feeding point can be one or several.、Materials are transported in a closed pipeline.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、It can feed from one place to many places for decentralized transportation and realize long-distance operation.，the product looks atmospheric.，be loved by our customers.。

Pneumatic conveying of metal particles

6、Introduction of hyde powder Company

Shandong Haide Fenti Engineering Co., Ltd., located in shandong(Province), is a large Pneumatic conveying of metal particles manufacturer. The Pneumatic conveying of metal particles produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde

Pneumatic conveying of metal particlesthe product looks beautiful.，The overall structural design is relatively simple，it is mainly composed of Air source system, Conveying pipeline system, dust pelletizing system, Bunker system and delivery system。