Introduction to Sintering ash conveying and pneumatic conveying structure principle

Sintering ash conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as cool.、Can realize the transportation of materials in a closed pipeline.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.，support customization。The following is to introduce the Sintering ash conveying:

1、Brief introduction of Sintering ash conveying

Sintering ash conveyingis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，It is mostly used in Long distance transportation, Process assistance, Heating, cooling and drying, Dust removal and essence, material handling, Mixing and classification and so on。

Sintering ash conveying

2、Sintering ash conveying structure composition

The Sintering ash conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Sintering ash conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Air source device

The air source device is the power core of the Sintering ash conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sintering ash conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Sintering ash conveying

3、Sintering ash conveying video

You can buy Sintering ash conveying according to your needs and show you product videos.。

Sintering ash conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. it is widely used in building material, building materials, transportation, logistics and power。

4、Sintering ash conveying function

Sintering ash conveyingmultifunctional, with functions such as Physical processing assistance, material handling, Automatic control, Automatic control and Physical processing assistance，is carefully developed by hyde powder combined with advanced technology。

Sintering ash conveying

5、Sintering ash conveying principle

Sintering ash conveyingMainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，super quality and competitive price。

Sintering ash conveying

Sintering ash conveyingis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，is a popular Sintering ash conveying。