Introduction and advantages of Bottom pneumatic conveying

Bottom pneumatic conveyingis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，it has been widely used in environmental protection, logistics, grain processing, medicine, metallurgy and other industries，It is mostly used in Bulk material transportation, cut down on energy consumption, Long distance transportation, Heating, cooling and drying, Process assistance, Dust removal and essence and so on，it has the functions of Automatic control, Physical processing assistance, Automatic control, Environmental protection and pollution-free and Closed conveying，customizable。

1、Brief introduction of Bottom pneumatic conveying

Bottom pneumatic conveyingis a technology to transport solid particulate materials through air flow.，it is an ideal choice for customers to buy Bottom pneumatic conveying。

Bottom pneumatic conveying

2、Bottom pneumatic conveying use

The purpose of Bottom pneumatic conveying is introduced as follows:

1. material handling

Bottom pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. Reduce pollution

The Bottom pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Bottom pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

4. Bulk material transportation

The Bottom pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Bottom pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

5. Long distance transportation

The Bottom pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

Bottom pneumatic conveying

3、Bottom pneumatic conveying advantage

Bottom pneumatic conveyings have the following advantages.

1. be of simple construction

Bottom pneumatic conveying has simple structure and convenient operation.

2. Strong adaptability

The Bottom pneumatic conveying system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

3. Environmental protection and pollution-free

The conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and escaping, reduces environmental pollution, improves the working environment and is conducive to protecting the health of production personnel.

4. Strong sealing

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

5. Multiple process operations can be carried out at the same time

In the process of conveying, the Bottom pneumatic conveying system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

Bottom pneumatic conveying

4、Advantages of Bottom pneumatic conveying principle

Bottom pneumatic conveyingat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，is developed and improved by hyde。

Bottom pneumatic conveying

5、Bottom pneumatic conveying price advantage

The Bottom pneumatic conveying price is introduced as follows:

1. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. product quality

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

3. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. hyde address:shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. market factors

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Bottom pneumatic conveying market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Bottom pneumatic conveying price and service can meet the actual needs of customers.

Bottom pneumatic conveying

6、Company selection

Choosing a suitable Bottom pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Bottom pneumatic conveying products that meet the demand and have good cost performance.。

hyde powder

Bottom pneumatic conveyingis a common Bottom pneumatic conveying，Fully enclosed transportation system, materials are transported in closed pipes.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、Can be transported from point to point or from point to point, and realize long-distance operation.、The materials are completely sealed during transportation.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.。