Introduction of Sodium chloride transportation

Sodium chloride transportationis a material conveying device that uses the pressure of gas to convey powder materials.，Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.。

1、Brief introduction of Sodium chloride transportation

Sodium chloride transportationis a kind of technology integrated material conveying equipment which uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.。

Sodium chloride transportation

2、Sodium chloride transportation advantage

The advantages of Sodium chloride transportation are as follows:

1. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Sodium chloride transportation occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

2. Wide application range

For materials with unstable chemical properties, the Sodium chloride transportation system can use inert gas for transportation to ensure the stability of the materials during transportation.

3. The quality of convey materials is ensure.

In the process of conveying, the Sodium chloride transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

4. Easy to maintain

The Sodium chloride transportation system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

Sodium chloride transportation

3、Sodium chloride transportation characteristics

Sodium chloride transportationfeatures include Convenient operation and management, Reliable equipment, easy installation, Convenient maintenance and Reliable operation，is a kind of Sodium chloride transportation manufactured by hyde powder。

Sodium chloride transportation

4、Sodium chloride transportation structure composition

The Sodium chloride transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Sodium chloride transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sodium chloride transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Sodium chloride transportation

5、Sodium chloride transportation principle

Sodium chloride transportationat runtime,Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，Mainly used forProcess assistance,Reduce pollution,material handling,Long distance transportation andHeating, cooling and drying，The price is low and affordable，modern technology。

Sodium chloride transportation

6、Structural characteristics of Sodium chloride transportation

The Sodium chloride transportation has the following structure

1. control system

The control system is the "brain" of the Sodium chloride transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Sodium chloride transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Sodium chloride transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Sodium chloride transportation

Sodium chloride transportationit has the functions of Closed conveying, Explosion-proof involves, material handling, Physical processing assistance and Automatic control，omniseal,Save manpower,System modularization,Good dustproof effect,Low energy consumption。