Brief introduction and advantages of Nitrogen recovery pneumatic conveying

Nitrogen recovery pneumatic conveyingby forming a pressure difference along the pipeline, the air is moved to the area with lower pressure to realize the transportation of bulk materials.。

1、Brief introduction of Nitrogen recovery pneumatic conveying

Nitrogen recovery pneumatic conveyingis a comprehensive technology, which involves fluid mechanics, material science, automation technology, manufacturing technology and other fields.，at runtime,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，it has been widely used in grain processing, heat-engine plant, chemical plant, building material, plastic and other industries，features include Save manpower, High system reliability, Wide range of conveying materials, Flexible conveying distance and Strong adaptability，Widely used in Dust removal and essence, Multi-point transportation, Heating, cooling and drying, Bulk material transportation and cut down on energy consumption。

Nitrogen recovery pneumatic conveying

2、Nitrogen recovery pneumatic conveying picture

The following pictures can be used for reference by new and old customers.。

Nitrogen recovery pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Structural advantages of Nitrogen recovery pneumatic conveying

The Nitrogen recovery pneumatic conveying has the following structure

1. Air source device

The air source device is the power core of the Nitrogen recovery pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Nitrogen recovery pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Nitrogen recovery pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Nitrogen recovery pneumatic conveying

4、Nitrogen recovery pneumatic conveying HD picture real shot

Various styles and styles of Nitrogen recovery pneumatic conveying, complete models, for you to choose at will.。

Nitrogen recovery pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Nitrogen recovery pneumatic conveying advantage

The advantages of Nitrogen recovery pneumatic conveying are as follows:

1. Strong adaptability

The Nitrogen recovery pneumatic conveying system can transport a variety of materials, including powdery, granular, fibrous and small block materials, and has strong adaptability. At the same time, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability of materials during transportation.

2. High conveying efficiency and low cost.

The Nitrogen recovery pneumatic conveying can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

3. Save space

Compared with other transportation modes, the Nitrogen recovery pneumatic conveying system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

4. Low maintenance cost

The Nitrogen recovery pneumatic conveying device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

5. Multi-point to multi-point transportation

The Nitrogen recovery pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Nitrogen recovery pneumatic conveying

6、Nitrogen recovery pneumatic conveying structure

The Nitrogen recovery pneumatic conveying structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Nitrogen recovery pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Nitrogen recovery pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Nitrogen recovery pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Nitrogen recovery pneumatic conveying

Nitrogen recovery pneumatic conveyingat the start of the operation,Using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，is a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.。