MSG pneumatic conveying detailed introduction

MSG pneumatic conveyingthat is, the technology of conveying granular materials in closed pipes by air flow.，the main structure includes Bunker system, delivery system, dust pelletizing system, dust pelletizing system and control system。

1、Brief introduction of MSG pneumatic conveying

MSG pneumatic conveyingis an advanced technology for conveying materials by aerodynamic force.，the product looks atmospheric.，The structure is novel, special, advanced, reasonable and scientific.，it is mainly composed of Air source system, Conveying pipeline system, delivery system, Bunker system and dust pelletizing system。

MSG pneumatic conveying

2、MSG pneumatic conveying real shot picture

MSG pneumatic conveying HD real shot, a variety of specifications and models display, for our customers to choose at will.。

MSG pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Working principle of MSG pneumatic conveying

MSG pneumatic conveyingMainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline.，can be customized according to user's needs.。

MSG pneumatic conveying

4、MSG pneumatic conveying explanation video

hyde powder provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

MSG pneumatic conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. Easy maintenance,convenient to use,Large conveying capacity,Convenient for material transportation and recovery.,Economic and environmental protection。

5、MSG pneumatic conveying structure composition

The MSG pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of MSG pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the MSG pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the MSG pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

MSG pneumatic conveying

6、How much is the MSG pneumatic conveying?

The MSG pneumatic conveying price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde MSG pneumatic conveying manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the MSG pneumatic conveying price can meet the purchasing needs of customers.

2. quality factor

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of MSG pneumatic conveying is low.

3. market supply and demand

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in MSG pneumatic conveying prices, so this is also the main factor affecting prices.

4. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. hyde powder the address is located at:shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

5. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

MSG pneumatic conveying

MSG pneumatic conveyingThe conveying system is closed.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.、PLC intelligent control, high degree of automation and simple operation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as cool.、Multi-point feeding and multi-point discharging can be realized, and remote operation can be realized.，It is a product series that integrates Dust removal and essence, Mixing and classification, Heating, cooling and drying, material handling and Environmental protection and cleaner production。