Introduction to Sand and stone transportation and pneumatic conveying system working principle

Sand and stone transportationis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.。

1、Brief introduction of Sand and stone transportation

Sand and stone transportationis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，The overall structural design is relatively simple and compact.，generally, it is composed of dust pelletizing system, Conveying pipeline system, Bunker system, Air source system, delivery system and other major components，the advantage is The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、The materials collected from several points can be sent to one place or one place to scattered points, and remote operation can be realized.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、Fully enclosed transportation system, materials are transported in closed pipes.，It can prevent the transported materials from being affected with damp, soiled or mixed with foreign matters, and it is completely sealed and pollution-free to transport.、Multi-point feeding and multi-point discharging are possible.，Cheap and high quality。

Sand and stone transportation

2、Sand and stone transportation characteristics

Sand and stone transportationfeatures include It is convenient to realize mechanization, The conveying speed is faster, Convenient for material transportation and recovery., Easy to use and Stable operation，is a conveying system that uses airflow to convey powder and granular materials.，in the course of work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，In the process of conveying, various technological operations can be carried out at the same time, such as dust.、The materials are completely sealed during transportation.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the conveying process, various technological operations can be carried out at the same time.、Remote operation can be carried out from several points to one place or from one place to several points.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，it is an ideal choice for customers to buy Sand and stone transportation。

Sand and stone transportation

3、Sand and stone transportation video detail

Speak directly with facts on the spot。

Sand and stone transportation

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. at the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.。

4、Sand and stone transportation structure composition

The Sand and stone transportation structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Sand and stone transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sand and stone transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Sand and stone transportation

5、Sand and stone transportation price consultation

The Sand and stone transportation price is introduced as follows:

1. product costs

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Sand and stone transportation.

2. Model size

There are many specifications and models of Sand and stone transportation in the market now. Under normal circumstances, the price of large-sized Sand and stone transportation is definitely higher than that of small-sized Sand and stone transportation.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. geographical position

hyde address:shandong(Province), the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

5. market demand

When the market demand for Sand and stone transportation is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

Sand and stone transportation

6、Company discount

Sand and stone transportation is a new type of pneumatic conveying system introduced by hyde manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for metallurgy and other industries. Now consult hyde powderSand and stone transportation, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

hyde

Sand and stone transportationit is widely used in transportation, logistics, building material, building materials and chemical plant，is a popular Sand and stone transportation。