Introduction to Positive electrode material transportation, advantages, characteristics and principles of pneumatic conveying

Positive electrode material transportationis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，the advantage is Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、Remote operation can be carried out from several points to one place in a centralized way or from one place to several points in a decentralized way.、The conveying system is closed.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、In the conveying process, various technological operations can be carried out at the same time.、Materials are transported in a closed pipeline.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.。The following is to introduce the Positive electrode material transportation:

1、Brief introduction of Positive electrode material transportation

Positive electrode material transportationthat is, the technology of conveying granular materials in closed pipes by air flow.，multifunctional, with functions such as Environmental protection and pollution-free, Physical processing assistance, Explosion-proof involves, Closed conveying and Automatic control，it is widely used in building materials, environmental protection, heat-engine plant, medicine and chemical plant，it is an ideal choice for customers to buy Positive electrode material transportation。

Positive electrode material transportation

2、Positive electrode material transportation structure

The Positive electrode material transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Positive electrode material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. control system

The control system is the "brain" of the Positive electrode material transportation system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Positive electrode material transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Positive electrode material transportation

3、Positive electrode material transportation application

Positive electrode material transportations have the following purposes.

1. Multi-point transportation

The Positive electrode material transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Long-distance and multipoint transportation

The Positive electrode material transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Positive electrode material transportations have important application value in large factories and cross-regional material transportation.

3. cut down on energy consumption

Although the power consumption of the Positive electrode material transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. material handling

Positive electrode material transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Positive electrode material transportation pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Positive electrode material transportation

4、Advantages of Positive electrode material transportation principle

Positive electrode material transportationat the start of the operation,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，is an advanced technology for conveying materials by aerodynamic force.，It is suitable for centralized transportation to one place, and the feeding point can be one or several.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、Fully enclosed transportation system, materials are transported in closed pipes.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.，the product looks beautiful.，is a Positive electrode material transportation。

Positive electrode material transportation

5、Positive electrode material transportation real beat

The following picture is a panoramic shot of hyde powder Positive electrode material transportation,the product looks atmospheric., which is trustworthy.。

Positive electrode material transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Structural characteristics of Positive electrode material transportation

The Positive electrode material transportation has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Air source device

The air source device is the power core of the Positive electrode material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Air source device

The air source device is the power core of the Positive electrode material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Positive electrode material transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Positive electrode material transportation

Positive electrode material transportationis a popular Positive electrode material transportation，is a material conveying system that uses the pressure of gas to convey powder materials.，at runtime,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.。