What is a Food pneumatic conveying? Introduction to the Working Principle of pneumatic conveying

Food pneumatic conveyingis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，support customization。

1、Brief introduction of Food pneumatic conveying

Food pneumatic conveyingis a reliable material conveying equipment for conveying powdery materials under high pressure.，multifunctional, with functions such as Environmental protection and pollution-free, material handling, Closed conveying, Automatic control and Explosion-proof involves。

Food pneumatic conveying

2、Food pneumatic conveying application

Food pneumatic conveyings have the following purposes.

1. Multi-point transportation

The Food pneumatic conveying system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Reduce pollution

The Food pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. material handling

Food pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Food pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

5. Mixing and classification

In the process of conveying, the Food pneumatic conveying system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

Food pneumatic conveying

3、Food pneumatic conveying use

The purpose of Food pneumatic conveying is introduced as follows:

1. Dust removal and purification

The Food pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. cut down on energy consumption

Although the power consumption of the Food pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Process assistance

In some production processes, Food pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Food pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

4. Adapt to complex environment

The Food pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Food pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Bulk material transportation

The Food pneumatic conveying is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Food pneumatic conveying, these materials can be efficiently transferred between different production links or equipment.

Food pneumatic conveying

4、Food pneumatic conveying structure

The Food pneumatic conveying structure is introduced as follows:

1. Air source device

The air source device is the power core of the Food pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Food pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. control system

The control system is the "brain" of the Food pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Air source device

The air source device is the power core of the Food pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Food pneumatic conveying

5、Food pneumatic conveying HD picture real shot

hyde powder Food pneumatic conveying complete specifications and models, new and old customers can choose at will, and high-definition pictures are available for customers' reference.。

Food pneumatic conveying

Note: All the pictures in this article were taken by hyde manufacturer.。

6、How to choose the right product manufacturer?

Choosing a suitable Food pneumatic conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Food pneumatic conveying products that meet the demand and have good cost performance.。

hyde

Food pneumatic conveyingis a popular Food pneumatic conveying，it has the functions of Physical processing assistance, Environmental protection and pollution-free, Physical processing assistance, Closed conveying and Automatic control。