Introduction to Powder particle conveying system and Powder conveying advantages and features

Powder particle conveying systemis an efficient and environment-friendly way to transport materials by using the energy of airflow.，Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，it has the characteristics of Safe and reliable, Stable operation, Centralized transportation, Save manpower and Reliable equipment，it is mainly composed of Conveying pipeline system, control system, delivery system, delivery system and Air source system，be loved by our customers.。The following is to introduce the Powder particle conveying system:

1、Brief introduction of Powder particle conveying system

Powder particle conveying systemis a conveying technology that uses the energy of airflow to convey granular materials along the airflow direction in a closed pipeline.，it is widely used in building material, plastic, heat-engine plant, cast, logistics and other industries，widely used in environmental protection, pharmaceutical factory, machine building, building materials, metallurgy and other fields，the advantage is Closed pipeline transportation，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.、Materials are transported by closed pipelines.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as cool.，the product looks beautiful.。

Powder particle conveying system

2、Structural characteristics of Powder particle conveying system

The Powder particle conveying system structure is introduced as follows:

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Powder particle conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. control system

The control system is the "brain" of the Powder particle conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Powder particle conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Powder particle conveying system

3、Powder particle conveying system function

Powder particle conveying systemit has the functions of material handling, Explosion-proof involves, Physical processing assistance, Closed conveying and Environmental protection and pollution-free，Structure consists of Bunker system, Conveying pipeline system, control system, dust pelletizing system, Bunker system and so on，Powder particle conveying systemThe structure is novel, special, advanced, reasonable and scientific.，the advantage is The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Materials are transported in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the conveying process, various technological operations can be carried out at the same time.、Can be charged at one place and then discharged at multiple places.。

Powder particle conveying system

4、Powder particle conveying system characteristics

Powder particle conveying systemthe main features are No secondary pollution, Can carry out long-distance dispersion transportation., Low energy consumption, High productivity and The failure rate is low，multifunctional, with functions such as Environmental protection and pollution-free, Explosion-proof involves, material handling, Closed conveying and Physical processing assistance，Simple structure and advanced technology.，it is usually composed of Air source system, Conveying pipeline system, delivery system, control system and dust pelletizing system，in the course of work,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，In the conveying process, various technological operations can be carried out at the same time.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Fully enclosed transportation system, materials are transported in closed pipes.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Multi-point feeding and multi-point discharging are possible.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation。

Powder particle conveying system

5、Powder particle conveying system price consultation

The Powder particle conveying system price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. technology content

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Powder particle conveying system price is affected by the configuration, and the price varies.

4. manufacturing cost

A Powder particle conveying system needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

5. specifications and models

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

Powder particle conveying system

6、hyde service

Our company hyde is not only good in product quality, but also professional in service, which can provide customers with high-standard services and tailor products according to their on-site construction conditions to ensure that they can meet their different needs. In addition, our company also carries out on-site product installation and debugging for customers, and trains staff on product operation knowledge and precautions, in order to make them operate products better and prolong the service life of products. In addition, if you have other questions, you can click on the online consultation, and a professional will answer them for you.。

hyde powder

Powder particle conveying systemit has the functions of material handling, Closed conveying, Automatic control, Physical processing assistance and Explosion-proof involves，Flexible layout,Easy to use,Reduce material loss,Flexible transmission line,automation，is a common Powder particle conveying system。