Introduction to Powder particle conveying equipment, introduction to pneumatic conveying system advantages and characteristics

Powder particle conveying equipmentis a conveying system that uses airflow to convey powder and granular materials.，The overall structural design is simple and novel.，it is mainly composed of control system, Conveying pipeline system, dust pelletizing system, Air source system and Bunker system。

1、Brief introduction of Powder particle conveying equipment

Powder particle conveying equipmentis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.，it is an ideal choice for customers to buy Powder particle conveying equipment。

Powder particle conveying equipment

2、Powder particle conveying equipment HD real shot

Details of hyde powder Powder particle conveying equipment,the product looks atmospheric.。

Powder particle conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Powder particle conveying equipment principle

Powder particle conveying equipmentthe principle is simple.Mainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，the product looks atmospheric.。

Powder particle conveying equipment

4、Powder particle conveying equipment performance advantage

Powder particle conveying equipments have the following advantages.

1. versatility

The Powder particle conveying equipment system can not only realize the transportation of materials, but also carry out various technological operations at the same time, such as mixing, crushing, grading, drying and cooling. This versatility makes Powder particle conveying equipments widely used in many industries.

2. High conveying efficiency and low cost.

The Powder particle conveying equipment can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

3. energy saving and environmental protection

Because the Powder particle conveying equipment is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

4. Efficient continuous transportation

The Powder particle conveying equipment system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

5. Strong adaptability

The Powder particle conveying equipment system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Powder particle conveying equipments widely used in many industries.

Powder particle conveying equipment

5、Powder particle conveying equipment structure

The Powder particle conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Powder particle conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Powder particle conveying equipment

6、Powder particle conveying equipment use

The purpose of Powder particle conveying equipment is introduced as follows:

1. Multi-point transportation

The Powder particle conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Long-distance and multipoint transportation

The Powder particle conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Powder particle conveying equipments have important application value in large factories and cross-regional material transportation.

3. Mixing and classification

In the process of conveying, the Powder particle conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. material handling

Powder particle conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Process assistance

In some production processes, Powder particle conveying equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Powder particle conveying equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Powder particle conveying equipment

Powder particle conveying equipmentit is usually composed of delivery system, Bunker system, Air source system, control system and delivery system，the product looks beautiful.。