What is a Dust free closed pneumatic conveying equipment? Introduction to the advantages and characteristics of the pneumatic conveying system

Dust free closed pneumatic conveying equipmentIt uses air energy to continuously convey powder and bulk materials.，usually used in grain processing, heat-engine plant, chemical plant, cast, power and other fields，the product looks atmospheric.。

1、Brief introduction of Dust free closed pneumatic conveying equipment

Dust free closed pneumatic conveying equipmentthat is, the technology of conveying granular materials in closed pipes by air flow.，the advantage is In the conveying process, various technological operations can be carried out at the same time.、Can be transported from point to point or from point to point, and realize long-distance operation.、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、The whole conveying process is sealed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.，It is a product series that integrates cut down on energy consumption, Reduce pollution, Mixing and classification, Heating, cooling and drying and Long distance transportation，is a common Dust free closed pneumatic conveying equipment，it has the characteristics of Reduce material loss, Strong adaptability, High reliability, Centralized transportation and Convenient maintenance。

Dust free closed pneumatic conveying equipment

2、Dust free closed pneumatic conveying equipment structure composition

The Dust free closed pneumatic conveying equipment has the following structure

1. control system

The control system is the "brain" of the Dust free closed pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. control system

The control system is the "brain" of the Dust free closed pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust free closed pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Dust free closed pneumatic conveying equipment

3、Dust free closed pneumatic conveying equipment application

Dust free closed pneumatic conveying equipments have the following purposes.

1. Long distance transportation

The Dust free closed pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. save energy and cut emissions

Although the Dust free closed pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Dust removal and purification

The Dust free closed pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. cut down on energy consumption

Although the power consumption of the Dust free closed pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Long-distance and multipoint transportation

The Dust free closed pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Dust free closed pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

Dust free closed pneumatic conveying equipment

4、Dust free closed pneumatic conveying equipment HD picture

Excellent material selection,the product looks atmospheric., trustworthy, panoramic shooting, helpful for customer reference.。

Dust free closed pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Dust free closed pneumatic conveying equipment principle

Dust free closed pneumatic conveying equipmentin the course of work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，It has the functions of Bulk material transportation, Environmental protection and cleaner production, material handling, Long-distance and multipoint transportation and Heating, cooling and drying，the product looks beautiful.。

Dust free closed pneumatic conveying equipment

6、Dust free closed pneumatic conveying equipment price consultation

The Dust free closed pneumatic conveying equipment price is introduced as follows:

1. Model size

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

2. quality factor

The service life of products with excellent quality will be longer, and at the same time, such products are very high in science and technology, which will create higher benefits for customers and make the price generally high, which is the main reason for the high price.

3. mass discrepancy

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Dust free closed pneumatic conveying equipment is low.

4. product model

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Dust free closed pneumatic conveying equipment has excellent performance, so it also makes the sales price high.

5. Cost input

The production cost is mainly the purchase of raw materials. hyde powder attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, hyde strives to reduce the input cost of products, and customers are very satisfied with this.

Dust free closed pneumatic conveying equipment

Dust free closed pneumatic conveying equipmentSafe and reliable,Convenient maintenance,automation,automation,Low energy consumption，the product looks beautiful.。