What is a Dust and ash pneumatic conveying system? Introduction to the advantages and characteristics of pneumatic conveying system functions

Dust and ash pneumatic conveying systemis a material conveying device that uses the pressure of gas to convey powder materials.。

1、Brief introduction of Dust and ash pneumatic conveying system

Dust and ash pneumatic conveying systemis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，the advantage is The whole conveying process is sealed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Remote operation can be carried out from several points to one place or from one place to several points.、In the process of conveying, various technological operations can be carried out at the same time, such as cool.、The operation mode is flexible and changeable, and it can run continuously or regularly.、Materials are transported in a closed pipeline.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.，Mainly used forHeating, cooling and drying,Long distance transportation,Reduce pollution,Process assistance andEnvironmental protection and cleaner production，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，is developed and improved by hyde。

Dust and ash pneumatic conveying system

2、Functional advantages of Dust and ash pneumatic conveying system

Dust and ash pneumatic conveying systems have the following advantages.

1. energy saving and environmental protection

The whole process of the Dust and ash pneumatic conveying system system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

2. Save space

Dust and ash pneumatic conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

3. Generality

The Dust and ash pneumatic conveying system system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Dust and ash pneumatic conveying systems widely used in many industries.

4. Convenient maintenance and easy automation.

The Dust and ash pneumatic conveying system device has simple structure and few moving parts, so the maintenance cost is relatively low. At the same time, because the transportation process is carried out in the closed pipeline, the occurrence of equipment wear and failure is reduced.

5. High conveying quality

In the process of conveying, the Dust and ash pneumatic conveying system system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

Dust and ash pneumatic conveying system

3、Structural advantages of Dust and ash pneumatic conveying system

The Dust and ash pneumatic conveying system has the following structure

1. Air source device

The air source device is the power core of the Dust and ash pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Dust and ash pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Air source device

The air source device is the power core of the Dust and ash pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Dust and ash pneumatic conveying system

4、Functional advantages of Dust and ash pneumatic conveying system

Dust and ash pneumatic conveying systems have the following advantages.

1. High conveying efficiency and low cost.

The continuity and high efficiency of the Dust and ash pneumatic conveying system enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

2. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Dust and ash pneumatic conveying system system can be seamlessly connected with other production equipment to improve the overall production efficiency.

3. Improve conveying efficiency

The Dust and ash pneumatic conveying system system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

4. structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

5. Material quality protection

In the process of conveying, the Dust and ash pneumatic conveying system system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

Dust and ash pneumatic conveying system

5、Dust and ash pneumatic conveying system work site real shot

Dust and ash pneumatic conveying system manufacturer, the product High definition shooting. In order to facilitate new and old customers to find satisfactory the product looks atmospheric. more quickly, the following high-definition pictures are provided for reference.。

Dust and ash pneumatic conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Dust and ash pneumatic conveying system characteristics

Dust and ash pneumatic conveying systemCan make full use of space,Efficient and flexible,Reduce material loss,Convenient for material transportation and recovery.,High productivity，it has been widely used in chemical plant, heat-engine plant, chemical industry, transportation, grain processing and other industries，the product looks beautiful.，it has the functions of Environmental protection and pollution-free, Closed conveying, material handling, Physical processing assistance and Explosion-proof involves，widely used in machine building, cast, build a ship, building material, medicine and other fields。

Dust and ash pneumatic conveying system

Dust and ash pneumatic conveying systemalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.，at the start of the operation,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.。