Introduction to Sintering ash conveying equipment, Powder conveying specifications, model parameters

Sintering ash conveying equipmentis a material conveying system which uses the energy of airflow to convey granular materials in a closed pipeline.。The following is to introduce the Sintering ash conveying equipment:

1、Brief introduction of Sintering ash conveying equipment

Sintering ash conveying equipmentis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，High conveying speed, good conveying quality and high conveying efficiency.、Materials are transported by closed pipelines.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、Can realize the transportation of materials in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，is a popular Sintering ash conveying equipment，multifunctional, with functions such as Environmental protection and pollution-free, material handling, Explosion-proof involves, Closed conveying and Environmental protection and pollution-free，be loved by our customers.。

Sintering ash conveying equipment

2、Structural advantages of Sintering ash conveying equipment

The Sintering ash conveying equipment has the following structure

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. control system

The control system is the "brain" of the Sintering ash conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Sintering ash conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Sintering ash conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Sintering ash conveying equipment

3、Sintering ash conveying equipment use

The purpose of Sintering ash conveying equipment is introduced as follows:

1. Mixing and classification

In the process of conveying, the Sintering ash conveying equipment system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Long-distance and multipoint transportation

The Sintering ash conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Sintering ash conveying equipments have important application value in large factories and cross-regional material transportation.

3. material handling

Sintering ash conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Multi-point transportation

The Sintering ash conveying equipment system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. Dust removal and purification

The Sintering ash conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

Sintering ash conveying equipment

4、Sintering ash conveying equipment display

High-definition pictures of reliable Sintering ash conveying equipment at a glance。

Sintering ash conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Introduction of Sintering ash conveying equipment characteristics

Sintering ash conveying equipmentfeatures include Reduce material loss, The failure rate is low, Low energy consumption, Easy to realize automation and Safe and reliable，is a kind of high quality and low price Sintering ash conveying equipment，also known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.。

Sintering ash conveying equipment

6、How much is the Sintering ash conveying equipment?

The Sintering ash conveying equipment price is introduced as follows:

1. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

2. market supply and demand

The market demand has a certain impact on the price of Sintering ash conveying equipment. When there are many customers who need Sintering ash conveying equipment in the market, there will be a phenomenon that demand exceeds supply, and then the price of Sintering ash conveying equipment will become higher. On the contrary, when there are very few customers who need Sintering ash conveying equipment, there will be a phenomenon of oversupply, and the price of Sintering ash conveying equipment will be reduced.

3. Parameter size

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Sintering ash conveying equipment, which have different models and different performances. Therefore, these are all factors that affect the price change of Sintering ash conveying equipment.

4. Manufacturer's strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Sintering ash conveying equipment price and service can meet the actual needs of customers.

Sintering ash conveying equipment

Sintering ash conveying equipmentStructure consists of Bunker system, delivery system, control system, dust pelletizing system, Air source system and so on，Sintering ash conveying equipmentThe overall structural design is relatively simple，Simple structure and reliable operation.，it mainly includes Conveying pipeline system, Conveying pipeline system, delivery system, dust pelletizing system and control system，it has the functions of material handling, Automatic control, Physical processing assistance, Explosion-proof involves and Automatic control。