Introduction to High temperature ash pneumatic conveying equipment, Powder conveying advantages, characteristics and principles

High temperature ash pneumatic conveying equipmentis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.，it is widely used in building material, machine building, transportation, cast and environmental protection，it has the functions of Closed conveying, Automatic control, Automatic control, Closed conveying and material handling。

1、Brief introduction of High temperature ash pneumatic conveying equipment

High temperature ash pneumatic conveying equipmentis a technology that uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，the product looks beautiful.，the main features are Can make full use of space, High reliability, Operation safety, The conveying speed is faster and Low energy consumption，the advantage is The material is completely closed in the whole conveying process.，It can prevent the material from spreading, with high quality, complete sealing and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、The materials are completely sealed during transportation.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、The operation mode is flexible and changeable, and it can run continuously or regularly.，the principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

High temperature ash pneumatic conveying equipment

2、High temperature ash pneumatic conveying equipment video detail

The following is the live video of High temperature ash pneumatic conveying equipment designed and produced by hyde powder for users, from which we can see the In the conveying process, various technological operations can be carried out at the same time.、Not only can the materials from multiple feeding points be transported to the unloading point in turn, but also the materials from multiple feeding points can be transported to the unloading point at the same time, and remote operation can be realized.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、Closed pipeline transportation，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken. of High temperature ash pneumatic conveying equipment.。

High temperature ash pneumatic conveying equipment

As you can see from the live video.，hyde powder the product looks atmospheric.。

3、On-site real shot of High temperature ash pneumatic conveying equipment

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

High temperature ash pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde manufacturer.。

4、High temperature ash pneumatic conveying equipment use

The purpose of High temperature ash pneumatic conveying equipment is introduced as follows:

1. Bulk material transportation

The High temperature ash pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the High temperature ash pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

2. save energy and cut emissions

Although the High temperature ash pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Environmental protection and cleaner production

The High temperature ash pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. Long-distance and multipoint transportation

The High temperature ash pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes High temperature ash pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

5. Bulk material transportation

The High temperature ash pneumatic conveying equipment is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the High temperature ash pneumatic conveying equipment, these materials can be efficiently transferred between different production links or equipment.

High temperature ash pneumatic conveying equipment

5、Advantages of High temperature ash pneumatic conveying equipment principle

High temperature ash pneumatic conveying equipmentUsing the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline. The former is called material suspension transportation, and the latter is called material group transportation.，is a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

High temperature ash pneumatic conveying equipment

High temperature ash pneumatic conveying equipmentis a popular High temperature ash pneumatic conveying equipment，the advantage is The whole conveying process is sealed.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.、High conveying speed, good conveying quality and high conveying efficiency.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as cool.。