Introduction to Ore pneumatic conveying equipment and pneumatic conveying system structure principle

Ore pneumatic conveying equipmentis a material conveying device that uses the pressure of gas to convey powder materials.，the product looks beautiful.，at the start of the operation,Mainly based on aerodynamic force, the continuous and stable transportation of granular materials is realized in a closed pipeline by using the energy of airflow.，It can be used for Heating, cooling and drying, Long distance transportation, Long-distance and multipoint transportation, Multi-point transportation, cut down on energy consumption, Process assistance and so on，The materials are completely sealed during transportation.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Can be transported from one point to one place or from one point to many points.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.。

1、Brief introduction of Ore pneumatic conveying equipment

Ore pneumatic conveying equipmentis a technology to transport solid particulate materials through air flow.，Widely used in Mixing and classification, Dust removal and essence, Environmental protection and cleaner production, material handling and Bulk material transportation，is carefully developed by hyde combined with advanced technology。

Ore pneumatic conveying equipment

2、Ore pneumatic conveying equipment structure composition

The Ore pneumatic conveying equipment structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ore pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Ore pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Ore pneumatic conveying equipment system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Ore pneumatic conveying equipment

3、Ore pneumatic conveying equipment function

Ore pneumatic conveying equipmentit has the functions of material handling, Explosion-proof involves, material handling, Closed conveying and Physical processing assistance。

Ore pneumatic conveying equipment

4、Ore pneumatic conveying equipment HD picture real shot

Take a look at the high-definition drawings of Ore pneumatic conveying equipment with excellent quality for our customers' reference.。

Ore pneumatic conveying equipment

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Ore pneumatic conveying equipment application

Ore pneumatic conveying equipments have the following purposes.

1. Long-distance and multipoint transportation

The Ore pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Ore pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

2. Reduce pollution

The Ore pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Environmental protection and cleaner production

The Ore pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

4. save energy and cut emissions

Although the Ore pneumatic conveying equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

5. cut down on energy consumption

Although the power consumption of the Ore pneumatic conveying equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Ore pneumatic conveying equipment

6、Structural characteristics of Ore pneumatic conveying equipment

The Ore pneumatic conveying equipment has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Ore pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. control system

The control system is the "brain" of the Ore pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Ore pneumatic conveying equipment

Ore pneumatic conveying equipmentis a Ore pneumatic conveying equipment，The overall structural design is relatively simple，the main structure includes control system, delivery system, Air source system, control system and Conveying pipeline system。