What is a Low noise and high-pressure Roots blower? How much is the price of the Three leaf Roots blower?

Low noise and high-pressure Roots bloweris a positive displacement blower with forced gas transmission characteristics.，is a Low noise and high-pressure Roots blower newly developed by hyde powder。

1、Brief introduction of Low noise and high-pressure Roots blower

Low noise and high-pressure Roots blowera rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，in the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，usually used in petrochemical industry, smelt, aquaculture, manufacturing industry, Pharmaceutical and chemical industries and other fields，It has a wide range of uses, including aquaculture, material handling, pick up the suction, dry and Material fluidization，it mainly includes rotator, impeller, fuel tank, wallboard and case，productThe overall structural design is relatively simple and compact.。

Low noise and high-pressure Roots blower

2、Low noise and high-pressure Roots blower performance advantage

Low noise and high-pressure Roots blowers have the following advantages.

1. energy-efficient

The Low noise and high-pressure Roots blower has high efficiency and can realize gas transportation and pressurization with low energy consumption.

2. Reliable operation and convenient maintenance

The structure form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.

3. Strong adaptability

The Low noise and high-pressure Roots blower is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

4. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

5. Low noise and vibration

The three-leaf rotor structure of the Low noise and high-pressure Roots blower makes it less vibration and noise. This feature makes the Low noise and high-pressure Roots blower work normally in situations where a quiet environment is needed.

Low noise and high-pressure Roots blower

3、Low noise and high-pressure Roots blower function

Low noise and high-pressure Roots blowermultifunctional, with functions such as cool, dehydrate, ventilation, material handling and aquaculture，at the start of the operation,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，Widely used in Desulfurization oxidation, dehydrate, Pressurized transportation, cool and Material fluidization。

Low noise and high-pressure Roots blower

4、Advantages of Low noise and high-pressure Roots blower principle

Low noise and high-pressure Roots blowerGas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，the main structure includes wallboard, impeller, rotator, muffler, impeller and so on，It is mostly used in Ventilation, pick up the suction, Pressurized transportation, mix, dehydrate, material handling and so on，is a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，the main features are economical and durable, low noise, stable and reliable, strong adaptability and wide application range。

Low noise and high-pressure Roots blower

5、Low noise and high-pressure Roots blower application

Low noise and high-pressure Roots blowerIt can be used for exhaust emission, aeration, sewage disposal, aquaculture, dry, supply air and so on，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

Low noise and high-pressure Roots blower

6、hyde workshop real shot

The finished products of the Low noise and high-pressure Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Low noise and high-pressure Roots blower factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Low noise and high-pressure Roots blowerat work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，The overall structural design is relatively simple，structure mainly includes: bearing, muffler, case, bearing, fuel tank and so on。