What is a Low noise high-pressure Roots blower? Introduction to the principle of Roots Blower structure

Low noise high-pressure Roots bloweris a positive displacement blower.，The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Low noise high-pressure Roots blower perform well in many situations where stable airflow is needed.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the Low noise high-pressure Roots blower runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Low noise high-pressure Roots blower has little vibration and low noise during operation, and the operation is stable and reliable、Small size and small floor space make it easy to arrange and install in places with limited space.，super quality and competitive price。

1、Brief introduction of Low noise high-pressure Roots blower

Low noise high-pressure Roots blowerthe models are complete and can meet the needs of different users for different purposes.。

Low noise high-pressure Roots blower

2、Low noise high-pressure Roots blower structure composition

The Low noise high-pressure Roots blower structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. impeller

It is the rotating part of the Low noise high-pressure Roots blower, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Low noise high-pressure Roots blower has gradually replaced the two-leaf Low noise high-pressure Roots blower.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Low noise high-pressure Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

Low noise high-pressure Roots blower

3、Low noise high-pressure Roots blower use

Low noise high-pressure Roots blowerIt has a wide range of uses, including Desulfurization oxidation, material handling, Ventilation, Desulfurization oxidation and Material fluidization，the product looks beautiful.，is a Low noise high-pressure Roots blower，it has the functions of material fluidization, pick up the suction, pressurized transportation, sewage disposal and desulfurization oxidation，it is an ideal choice for customers to buy Low noise high-pressure Roots blower。

Low noise high-pressure Roots blower

4、Low noise high-pressure Roots blower structure composition

The Low noise high-pressure Roots blower has the following structure

1. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

2. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

3. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Low noise high-pressure Roots blower, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

4. muffler

Used to reduce the noise caused by airflow pulsation when the Low noise high-pressure Roots blower enters and exits.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Low noise high-pressure Roots blower

5、Advantages of Low noise high-pressure Roots blower principle

Low noise high-pressure Roots blowerThe gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，is a kind of high quality and low price Low noise high-pressure Roots blower。

Low noise high-pressure Roots blower

6、Low noise high-pressure Roots blower price consultation

The Low noise high-pressure Roots blower price is introduced as follows:

1. Brand strength

At present, there are various brands of Low noise high-pressure Roots blower in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Low noise high-pressure Roots blower are different.

2. product configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. hyde has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. market

When the market demand for Low noise high-pressure Roots blower is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

4. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. Reasonable cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Low noise high-pressure Roots blower just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

Low noise high-pressure Roots blower

Low noise high-pressure Roots blowerIt has a wide range of uses, and is often used insewage disposal,dehydrate,aeration,exhaust emission,dry and so on，is a common Low noise high-pressure Roots blower。