Introduction to Roots blower for steam conveying, introduction to blower function advantages and characteristics

Roots blower for steam conveyinga rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

1、Brief introduction of Roots blower for steam conveying

Roots blower for steam conveyingthe models are complete and can meet the needs of different users for different purposes.，the advantage is The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Roots blower for steam conveying less vibration and noise.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、In the process of air intake and exhaust, the Roots blower for steam conveying will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Small size and small floor space make it easy to arrange and install in places with limited space.，It is mostly used in dehydrate, Ventilation, aquaculture, Desulfurization oxidation, mix, material handling and so on，the main structure includes muffler, rotator, fuel tank, impeller, wallboard and so on，This productSimple structure and advanced technology.，the principle is simple.When the motor drives one impeller to rotate, the other impeller will rotate synchronously at the same speed and in the opposite direction under the action of the synchronous gear. In the process of rotation, because the gaps between impeller and impeller, impeller and casing, impeller and wallboard are very small, a vacuum state is formed at the air inlet, and air is sucked into the air inlet cavity under the action of atmospheric pressure. As the impeller continues to rotate, two blades of each impeller, the wallboard and the casing form a sealed cavity, and the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades. Because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out. After continuous inhalation and extrusion, air is continuously transported from the air inlet to the air outlet, completing the whole gas transportation process.。

Roots blower for steam conveying

2、Roots blower for steam conveying structure

The Roots blower for steam conveying structure is introduced as follows:

1. muffler

Used to reduce the noise caused by airflow pulsation when the Roots blower for steam conveying enters and exits.

2. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Roots blower for steam conveying, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

3. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

Roots blower for steam conveying

3、Roots blower for steam conveying working site

hyde provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Roots blower for steam conveying production process and production site, and gain favorable comments and recognition from customers.。

Roots blower for steam conveying

As you can see from the live video.，hyde It is mostly used in mix, cool, dry, dehydrate, Desulfurization oxidation, supply air and so on。

4、Roots blower for steam conveying performance advantage

Roots blower for steam conveyings have the following advantages.

1. Convenient maintenance

The structure of the Roots blower for steam conveying is relatively simple and easy to maintain.

2. Simple structure and convenient manufacture

The Roots blower for steam conveying is simple in design and easy to manufacture and maintain.

3. Wide application range

Roots blower for steam conveyings are widely used in many fields, such as make paper, etc., especially suitable for gas transportation and pressurization systems in low-pressure occasions, and can also be used as vacuum pumps.

4. Stable and reliable

Due to the adoption of synchronous gear transmission and small gap design, the Roots blower for steam conveying runs stably and reliably, without contact and wear parts, and has a long service life.

5. Long service life

The mechanical friction of the Roots blower for steam conveying is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Roots blower for steam conveying

5、Roots blower for steam conveying video detail

On-site aerial photography of Roots blower for steam conveying。

Roots blower for steam conveying

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. the main structure includes case, bearing, case, rotator, muffler and so on。

6、How to choose the right product manufacturer?

Choosing a suitable Roots blower for steam conveying manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Roots blower for steam conveying products that meet the demand and have good cost performance.。

hyde powder

Roots blower for steam conveyingat runtime,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，is a positive displacement blower with forced gas transmission characteristics.。