Introduction to Unmanned feeding pneumatic conveying, advantages, characteristics and principles of Material conveying

Unmanned feeding pneumatic conveyingmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，is designed by hyde with advanced technology。

1、Brief introduction of Unmanned feeding pneumatic conveying

Unmanned feeding pneumatic conveyingis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.。

Unmanned feeding pneumatic conveying

2、Unmanned feeding pneumatic conveying use

The purpose of Unmanned feeding pneumatic conveying is introduced as follows:

1. Reduce pollution

The Unmanned feeding pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Environmental protection and cleaner production

The Unmanned feeding pneumatic conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

3. material handling

Unmanned feeding pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

4. Long distance transportation

The Unmanned feeding pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

5. cut down on energy consumption

Although the power consumption of the Unmanned feeding pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

Unmanned feeding pneumatic conveying

3、Unmanned feeding pneumatic conveying structure composition

The Unmanned feeding pneumatic conveying has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Unmanned feeding pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Air source device

The air source device is the power core of the Unmanned feeding pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. control system

The control system is the "brain" of the Unmanned feeding pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Unmanned feeding pneumatic conveying

4、Unmanned feeding pneumatic conveying performance advantage

Unmanned feeding pneumatic conveyings have the following advantages.

1. energy saving and environmental protection

In the process of Unmanned feeding pneumatic conveying opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

2. The quality of convey materials is ensure.

In the process of conveying, the Unmanned feeding pneumatic conveying system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

3. versatility

While conveying materials, the Unmanned feeding pneumatic conveying system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

4. High conveying efficiency and low cost.

The continuity and high efficiency of the Unmanned feeding pneumatic conveying enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

5. Save space

Compared with the traditional mechanical conveying mode, the Unmanned feeding pneumatic conveying system can save a lot of mechanical equipment and conveying pipes, thus saving a lot of space.

Unmanned feeding pneumatic conveying

5、Unmanned feeding pneumatic conveying field real shot

On-site aerial photography of Unmanned feeding pneumatic conveying。

Unmanned feeding pneumatic conveying

As you can see from the live video.，hyde powder it is widely used in cast, logistics, machine building, medicine and building materials。

6、hyde's strength

The company has many years of Unmanned feeding pneumatic conveying manufacturing experience, large scale and strong strength.。

hyde powder

Unmanned feeding pneumatic conveyingthe advantage is High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、The materials are completely sealed during transportation.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.，is a kind of technical integrated system that uses air or gas flow as conveying power to convey bulk solid materials in pipelines.。