Zirconium sand pneumatic conveying equipment detailed introduction

Zirconium sand pneumatic conveying equipmentmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，is a kind of high quality and low price Zirconium sand pneumatic conveying equipment，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，it has the characteristics of automation, Convenient operation and management, Simple system, It is convenient to realize mechanization and High conveying efficiency，is a common Zirconium sand pneumatic conveying equipment。

1、Brief introduction of Zirconium sand pneumatic conveying equipment

Zirconium sand pneumatic conveying equipmentis a technology to transport solid particulate materials through air flow.，The overall structural design is relatively simple，the main structure includes Conveying pipeline system, Bunker system, Air source system, delivery system, dust pelletizing system and so on，it is an ideal choice for customers to buy Zirconium sand pneumatic conveying equipment。

Zirconium sand pneumatic conveying equipment

2、Zirconium sand pneumatic conveying equipment structure composition

The Zirconium sand pneumatic conveying equipment has the following structure

1. control system

The control system is the "brain" of the Zirconium sand pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Zirconium sand pneumatic conveying equipment system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Zirconium sand pneumatic conveying equipment system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Zirconium sand pneumatic conveying equipment

3、Zirconium sand pneumatic conveying equipment function

Zirconium sand pneumatic conveying equipmentmultifunctional, with functions such as Physical processing assistance, material handling, Automatic control, Explosion-proof involves and Environmental protection and pollution-free，is a Zirconium sand pneumatic conveying equipment newly developed by hyde。

Zirconium sand pneumatic conveying equipment

4、Zirconium sand pneumatic conveying equipment application

Zirconium sand pneumatic conveying equipments have the following purposes.

1. Reduce pollution

The Zirconium sand pneumatic conveying equipment system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

2. Dust removal and purification

The Zirconium sand pneumatic conveying equipment system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

3. Long-distance and multipoint transportation

The Zirconium sand pneumatic conveying equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Zirconium sand pneumatic conveying equipments have important application value in large factories and cross-regional material transportation.

4. material handling

Zirconium sand pneumatic conveying equipment system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Environmental protection and cleaner production

The Zirconium sand pneumatic conveying equipment process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

Zirconium sand pneumatic conveying equipment

5、Introduction of advantages of Zirconium sand pneumatic conveying equipment

The advantages of Zirconium sand pneumatic conveying equipment are as follows:

1. Multiple process operations can be carried out at the same time

In the process of conveying, the Zirconium sand pneumatic conveying equipment system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. High conveying efficiency

Can transport materials quickly and in large quantities.

3. Convenient maintenance and easy automation.

The Zirconium sand pneumatic conveying equipment device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

4. High conveying quality

In the process of conveying, the Zirconium sand pneumatic conveying equipment system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

5. Environmental protection and pollution-free

In the process of Zirconium sand pneumatic conveying equipment opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

Zirconium sand pneumatic conveying equipment

6、How much is the Zirconium sand pneumatic conveying equipment?

The Zirconium sand pneumatic conveying equipment price is introduced as follows:

1. company strength

Although there are many manufacturers of products in shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

2. Low cost of raw materials

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. hyde powder has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Zirconium sand pneumatic conveying equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Zirconium sand pneumatic conveying equipment price can meet the purchasing needs of customers.

4. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. Manufacturer's sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

Zirconium sand pneumatic conveying equipment

Zirconium sand pneumatic conveying equipmentis a popular Zirconium sand pneumatic conveying equipment，It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.。