What is a HDSR200V Roots Vacuum Pump Unit? Introduction to the Working Principle of Three leaf Roots blower

HDSR200V Roots Vacuum Pump Unitis a positive displacement blower.，It has a wide range of uses, including aquaculture, material handling, exhaust emission, aeration and cool，The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the HDSR200V Roots Vacuum Pump Unit less vibration and noise.、In the process of air intake and exhaust, the HDSR200V Roots Vacuum Pump Unit will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、Due to the adoption of synchronous gear transmission and small gap design, the HDSR200V Roots Vacuum Pump Unit runs stably and reliably, without contact and wear parts, and has a long service life.、In the process of air intake and exhaust, the HDSR200V Roots Vacuum Pump Unit will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.，is carefully developed by hyde combined with advanced technology。The following is to introduce the HDSR200V Roots Vacuum Pump Unit:

1、Brief introduction of HDSR200V Roots Vacuum Pump Unit

HDSR200V Roots Vacuum Pump Unitis a positive displacement blower with forced gas transmission characteristics.，Commonly used indehydrate,dry,Desulfurization oxidation,Pressurized transportation,aquaculture and so on，Cheap and high quality。

HDSR200V Roots Vacuum Pump Unit

2、Structural characteristics of HDSR200V Roots Vacuum Pump Unit

The HDSR200V Roots Vacuum Pump Unit structure is introduced as follows:

1. impeller

It is the rotating part of the HDSR200V Roots Vacuum Pump Unit, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf HDSR200V Roots Vacuum Pump Unit has gradually replaced the two-leaf HDSR200V Roots Vacuum Pump Unit.

2. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

3. rotator

The core components are two identical lobed rotors, which usually adopt involute or epicycloid envelope design to ensure close cooperation during rotation and reduce leakage.

4. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

5. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the HDSR200V Roots Vacuum Pump Unit, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

HDSR200V Roots Vacuum Pump Unit

3、HDSR200V Roots Vacuum Pump Unit introduction video

Speak directly with facts on the spot。

HDSR200V Roots Vacuum Pump Unit

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. multifunctional, with functions such as material handling, mix, ventilation, sewage disposal and aeration。

4、HDSR200V Roots Vacuum Pump Unit function

HDSR200V Roots Vacuum Pump Unitit has the functions of pick up the suction, cool, dehydrate, dry and material handling，the product looks beautiful.。

HDSR200V Roots Vacuum Pump Unit

5、HDSR200V Roots Vacuum Pump Unit performance advantage

The advantages of HDSR200V Roots Vacuum Pump Unit are as follows:

1. Low noise

The design of the three-blade rotor effectively controls the noise and vibration of the fan.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. be of simple construction

The HDSR200V Roots Vacuum Pump Unit is simple in design and easy to manufacture and maintain.

4. Durable performance

The impeller and shaft of the HDSR200V Roots Vacuum Pump Unit are designed as a whole, and the impeller is not worn, so the performance is durable and can run continuously for a long time.

5. Long service life

The mechanical friction of the HDSR200V Roots Vacuum Pump Unit is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

HDSR200V Roots Vacuum Pump Unit

6、hyde powder workshop real shot

Speak directly with facts on the spot。

HDSR200V Roots Vacuum Pump Unit

As you can see from the live video.hyde the advantage is Because of the design of three-blade rotor, the HDSR200V Roots Vacuum Pump Unit has little vibration and low noise during operation, and the operation is stable and reliable、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the HDSR200V Roots Vacuum Pump Unit less vibration and noise.、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.。

HDSR200V Roots Vacuum Pump Unitit is widely used in building materials, mine, pottery and porcelain, building materials and smelt，the principle is simple.The two three-blade impellers rotate relatively in the space sealed by the casing and the wallboard. Each impeller adopts the envelope of involute or epicycloid, the three blades of each impeller are exactly the same, and the two impellers are also exactly the same, which greatly reduces the machining difficulty. During the rotation of the impeller, air enters the air inlet cavity under the action of atmospheric pressure, and then two blades of each impeller, the wallboard and the casing form a sealed cavity. During the rotation of the impeller, the air in the air inlet cavity is continuously brought to the exhaust cavity by the sealed cavity formed by the two blades, and because the impellers in the exhaust cavity are meshed with each other, the air between the two blades is squeezed out, so that the air is continuously transported from the air inlet to the air outlet.，It has a wide range of uses, and is often used inDesulfurization oxidation,Material fluidization,dry,aeration,exhaust emission and so on。