What is a Dry gas sealed Roots vacuum pump? Introduction to the advantages, characteristics, and principles of the Roots Blower

Dry gas sealed Roots vacuum pumpthe models are complete and can meet the needs of different users for different purposes.，Widely used in exhaust emission, pick up the suction, sewage disposal, Ventilation and Material fluidization。The following is to introduce the Dry gas sealed Roots vacuum pump:

1、Brief introduction of Dry gas sealed Roots vacuum pump

Dry gas sealed Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.，is an advanced Dry gas sealed Roots vacuum pump developed by our company in combination with the actual situation of the industry。

Dry gas sealed Roots vacuum pump

2、Dry gas sealed Roots vacuum pump advantage

The advantages of Dry gas sealed Roots vacuum pump are as follows:

1. Simple structure and convenient manufacture

The Dry gas sealed Roots vacuum pump is simple in design and easy to manufacture and maintain.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Smooth operation

The air volume of the Dry gas sealed Roots vacuum pump is proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Dry gas sealed Roots vacuum pump perform well in many situations where stable airflow is needed.

4. Low noise and vibration

The three-leaf rotor structure of the Dry gas sealed Roots vacuum pump makes it less vibration and noise. This feature makes the Dry gas sealed Roots vacuum pump work normally in situations where a quiet environment is needed.

5. Run smoothly

The structure form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.

Dry gas sealed Roots vacuum pump

3、Dry gas sealed Roots vacuum pump structure

The Dry gas sealed Roots vacuum pump structure is introduced as follows:

1. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

4. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Dry gas sealed Roots vacuum pump, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

5. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

Dry gas sealed Roots vacuum pump

4、Dry gas sealed Roots vacuum pump use

Dry gas sealed Roots vacuum pumpWidely used indry,aquaculture,Desulfurization oxidation,supply air,aeration and so on，at work,Gas is compressed and transported based on the relative motion of two lobed rotors in the cylinder. When the two rotors rotate, the volume between them changes constantly, thus realizing the suction, compression and discharge of gas.，it has the functions of supply air, sewage disposal, aquaculture, material handling and pressurized transportation，is a double impeller synchronous compression machine, belonging to a positive displacement blower.，Due to the adoption of synchronous gear transmission and small gap design, the Dry gas sealed Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、Because of the design of three-blade rotor, the Dry gas sealed Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Dry gas sealed Roots vacuum pump less vibration and noise.。

Dry gas sealed Roots vacuum pump

5、Working principle of Dry gas sealed Roots vacuum pump

Dry gas sealed Roots vacuum pumpin the course of work,The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.，the product looks atmospheric.，multifunctional, with functions such as dry, aeration, desulfurization oxidation, ventilation and pick up the suction，It is a product series that integrates material handling, Pressurized transportation, dehydrate, cool and mix，is developed and improved by hyde powder。

Dry gas sealed Roots vacuum pump

6、Dry gas sealed Roots vacuum pump quotation

The Dry gas sealed Roots vacuum pump price is introduced as follows:

1. Reasonable cost

When the Dry gas sealed Roots vacuum pump is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. Brand strength

At present, there are various brands of Dry gas sealed Roots vacuum pump in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Dry gas sealed Roots vacuum pump are different.

3. Manufacturer's strength

Our factory is a direct selling manufacturer of Dry gas sealed Roots vacuum pump, with independent production and processing facilities, few circulation links and low circulation cost.

4. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

5. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Dry gas sealed Roots vacuum pump

Dry gas sealed Roots vacuum pumpit can be used in Dust removal, mine, coal chemical industry, pottery and porcelain, manufacturing industry and other industries，Structure consists of wallboard, bearing, case, rotator, muffler and so on。