Introduction to Water cooled Roots vacuum pump, Three leaf Roots blower advantages, characteristics and principles

Water cooled Roots vacuum pumpthe models are complete and can meet the needs of different users for different purposes.，Structure consists of muffler, case, wallboard, rotator, muffler and so on，This productSimple structure and advanced technology.，the advantage is Small size and small floor space make it easy to arrange and install in places with limited space.、It has high efficiency and can realize gas transportation and pressurization with low energy consumption.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Water cooled Roots vacuum pump perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Water cooled Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Water cooled Roots vacuum pump less vibration and noise.，the product looks atmospheric.，the principle is simple.The gas is compressed and transported by the relative rotation of a pair of trilobal rotors in the cylinder. Each trilobal rotor is supported by two bearings, and the relative position of the two rotors is always kept constant by using a pair of synchronous gears. During the rotation of the rotor, there are tiny gaps between impeller and impeller, impeller and casing, impeller and side cover, so there is no friction in the working chamber and no lubrication is needed, thus realizing the smooth transportation of gas.。

1、Brief introduction of Water cooled Roots vacuum pump

Water cooled Roots vacuum pumpa rotary compressor that uses two lobed rotors to move relative to each other in a cylinder to compress and transport gas.。

Water cooled Roots vacuum pump

2、Introduction of Water cooled Roots vacuum pump characteristics

Water cooled Roots vacuum pumpfeatures include stable and reliable, convenient maintenance, strong adaptability, Precise control and wide application range。

Water cooled Roots vacuum pump

3、Introduction of advantages of Water cooled Roots vacuum pump

The advantages of Water cooled Roots vacuum pump are as follows:

1. Wide application range

The Water cooled Roots vacuum pump is suitable for conveying and pressurizing a variety of gases, including air, oxygen, nitrogen, etc., and can work stably under different pressures and flows.

2. Stable air output

Due to the adoption of synchronous gear transmission and small gap design, the Water cooled Roots vacuum pump runs stably and reliably, without contact and wear parts, and has a long service life.

3. Compact structure and small floor space.

The Water cooled Roots vacuum pump is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

4. Strong adaptability

Water cooled Roots vacuum pumps are suitable for many purposes and have been widely used in various fields.

5. Long service life

The mechanical friction of the Water cooled Roots vacuum pump is small and the loss is low, so its service life is relatively long. This enables it to maintain high working efficiency and stability in long-term operation.

Water cooled Roots vacuum pump

4、Water cooled Roots vacuum pump display

The following pictures can be used for reference by new and old customers.。

Water cooled Roots vacuum pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

5、Water cooled Roots vacuum pump price consultation

The Water cooled Roots vacuum pump price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde Water cooled Roots vacuum pump manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Water cooled Roots vacuum pump price can meet the purchasing needs of customers.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Water cooled Roots vacuum pump have more or less differences in price.

3. sales mode

hyde powder has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. market supply and demand

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Water cooled Roots vacuum pump will be very high.

Water cooled Roots vacuum pump

6、company introduction

Shandong Haide Fenti Engineering Co., Ltd., located in jinan, is a large Water cooled Roots vacuum pump manufacturer. The Water cooled Roots vacuum pump produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

hyde powder

Water cooled Roots vacuum pumpthe main features are run smoothly, smooth operation, durable performance, wide application range and convenient maintenance，Simple structural design, stable and reliable operation and convenient maintenance. This enables it to maintain high working efficiency and stability in long-term operation.、Because of the design of three-blade rotor, the Water cooled Roots vacuum pump has little vibration and low noise during operation, and the operation is stable and reliable、In the process of air intake and exhaust, the Water cooled Roots vacuum pump will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the fan have small vibration and low noise.。