What is a Water cooled Roots vacuum pump unit? Introduction to the advantages and characteristics of the Roots Blower

Water cooled Roots vacuum pump unitis a positive displacement blower.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes bearing, fuel tank, impeller, bearing, wallboard and so on。

1、Brief introduction of Water cooled Roots vacuum pump unit

Water cooled Roots vacuum pump unitis a device that generates positive pressure or negative pressure through the relative rotation of two impellers, thus compressing and conveying gas.，is a popular Water cooled Roots vacuum pump unit，the advantage is In the process of air intake and exhaust, the Water cooled Roots vacuum pump unit will not produce air pulsation, which means that it does not need an additional buffer gas tank to output gas smoothly. This is particularly important for processes that require stable airflow.、Small size and small floor space make it easy to arrange and install in places with limited space.、The air volume is directly proportional to the rotating speed, so its air output is very stable and basically unaffected by pressure changes. This characteristic makes the Water cooled Roots vacuum pump unit perform well in many situations where stable airflow is needed.、Due to the adoption of synchronous gear transmission and small gap design, the Water cooled Roots vacuum pump unit runs stably and reliably, without contact and wear parts, and has a long service life.、The structural form of the three-blade rotor and the reasonable structure of the air inlet and outlet in the shell make the Water cooled Roots vacuum pump unit less vibration and noise.，is an advanced Water cooled Roots vacuum pump unit developed by our company in combination with the actual situation of the industry。

Water cooled Roots vacuum pump unit

2、Structural characteristics of Water cooled Roots vacuum pump unit

The Water cooled Roots vacuum pump unit structure is introduced as follows:

1. case

It mainly plays the role of supporting (wallboard, impeller, muffler) and fixing. The casing is the external structure of the Water cooled Roots vacuum pump unit, which is used to support and fix the rotor, bearings and other components, while ensuring the gas tightness.

2. bearing

It is used to support the rotation of the rotor and bear the weight of the rotor and the load during operation.

3. impeller

It is the rotating part of the Water cooled Roots vacuum pump unit, which is divided into two leaves and three leaves. However, due to many advantages such as smaller air pulsation, less noise and smoother operation, the three-leaf Water cooled Roots vacuum pump unit has gradually replaced the two-leaf Water cooled Roots vacuum pump unit.

4. fuel tank

Mainly used for storing lubricating oil used for lubricating gears and bearings. The oil tank is used to store lubricating oil to lubricate bearings and gears and reduce wear and friction.

5. wallboard

It is mainly used to connect the casing with the impeller, support the rotation of the impeller, and play the role of end sealing.

Water cooled Roots vacuum pump unit

3、Water cooled Roots vacuum pump unit use

Water cooled Roots vacuum pump unitIt can be used for Desulfurization oxidation, pick up the suction, mix, dry, aquaculture, sewage disposal and so on。

Water cooled Roots vacuum pump unit

4、Water cooled Roots vacuum pump unit work site real shot

The Water cooled Roots vacuum pump unit has been upgraded, and the beauty of details is appreciated.。

Water cooled Roots vacuum pump unit

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Water cooled Roots vacuum pump unit use

Water cooled Roots vacuum pump unitIt is mostly used in dehydrate, Pressurized transportation, cool, material handling, Desulfurization oxidation, material handling and so on，it is mainly composed of rotator, impeller, fuel tank, muffler and case，Water cooled Roots vacuum pump unitThe overall structural design is simple and novel.，in the course of work,It mainly depends on the relative movement of two lobed rotors (usually three-bladed impellers) in the cylinder to compress and transport gas.，multifunctional, with functions such as aquaculture, material fluidization, ventilation, pressurized transportation and mix，is a common Water cooled Roots vacuum pump unit。

Water cooled Roots vacuum pump unit

6、Water cooled Roots vacuum pump unit advantage

The advantages of Water cooled Roots vacuum pump unit are as follows:

1. be of simple construction

The Water cooled Roots vacuum pump unit is small in size and occupies a small area, which makes it easy to arrange and install in places with limited space.

2. Economical and durable

The design without lubrication reduces the maintenance cost and improves the economy of the equipment.

3. Low noise and vibration

The three-leaf rotor structure of the Water cooled Roots vacuum pump unit makes it less vibration and noise. This feature makes the Water cooled Roots vacuum pump unit work normally in situations where a quiet environment is needed.

4. Convenient maintenance

The structure of the Water cooled Roots vacuum pump unit is relatively simple and easy to maintain.

5. energy-efficient

The Water cooled Roots vacuum pump unit has high efficiency and can realize gas transportation and pressurization with low energy consumption.

Water cooled Roots vacuum pump unit

Water cooled Roots vacuum pump unitthe product looks beautiful.，it is widely used inpottery and porcelain,aquaculture,Pharmaceutical and chemical industries,manufacturing industry,aquaculture and other industries。