Brief introduction of Particle material transportation

Particle material transportationthat is, the technology of conveying granular materials in closed pipes by air flow.，was developed and designed by hyde powder。The following is to introduce the Particle material transportation:

1、Brief introduction of Particle material transportation

Particle material transportationmainly based on aerodynamic force, granular materials are transported along the airflow direction in a closed pipeline by using the energy of airflow.。

Particle material transportation

2、Introduction of Particle material transportation characteristics

Particle material transportationHigh production efficiency,Simple operation,Operation safety,System modularization,Easy maintenance，is a common Particle material transportation。

Particle material transportation

3、Particle material transportation application

The purpose of Particle material transportation is introduced as follows:

1. save energy and cut emissions

Although the Particle material transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Bulk material transportation

The Particle material transportation is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Particle material transportation, these materials can be efficiently transferred between different production links or equipment.

3. Mixing and classification

In the process of conveying, the Particle material transportation system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

4. Environmental protection and cleaner production

The Particle material transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. material handling

Particle material transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Particle material transportation

4、Particle material transportation structure

The Particle material transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Particle material transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Particle material transportation system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Particle material transportation

5、Particle material transportation HD picture real shot

The beauty of Particle material transportation comes from the detail design.。

Particle material transportation

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Particle material transportation price

The Particle material transportation price is introduced as follows:

1. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. Sales model

hyde has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. market

In order to build their own brands, some manufacturers deliberately reduce the price of Particle material transportation. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

5. market demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Particle material transportation will fluctuate greatly, and the market changes are various.

Particle material transportation

Particle material transportationThe material is completely closed in the whole conveying process.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、Flexible pipeline layout, closed pipeline can be adjusted according to production conditions, which is relatively flexible.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as dry.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、Can realize the transportation of materials in a closed pipeline.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.，the main features are Operation safety, Can reduce the labor intensity, No secondary pollution, Reliable equipment and Long conveying distance，structure mainly includes: Conveying pipeline system, dust pelletizing system, Air source system, Bunker system, delivery system and so on，This Particle material transportationThe structure is novel, special, advanced, reasonable and scientific.。