Introduction to Ceramic particle transportation, advantages, characteristics and principles of pneumatic conveying

Ceramic particle transportationis a material conveying device that uses the pressure of gas to convey powder materials.，the product looks beautiful.，Commonly used inEnvironmental protection and cleaner production,Dust removal and essence,Mixing and classification,Long distance transportation,material handling and so on，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，Can carry out long-distance dispersion transportation.,Centralized transportation,Easy to automate management,Can make full use of space,easy installation。The following is to introduce the Ceramic particle transportation:

1、Brief introduction of Ceramic particle transportation

Ceramic particle transportationis a reliable material conveying equipment for conveying powdery materials under high pressure.，is developed and improved by hyde powder。

Ceramic particle transportation

2、Introduction of advantages of Ceramic particle transportation

Ceramic particle transportations have the following advantages.

1. High conveying quality

In the process of conveying, the Ceramic particle transportation system can prevent the materials from being wetted, stained or mixed with other sundries, thus ensuring the quality of the conveyed materials.

2. Save space

Compared with other transportation modes, the Ceramic particle transportation system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

3. High degree of automation

The Ceramic particle transportation system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

4. High conveying efficiency and low cost.

Can transport materials quickly and in large quantities.

5. Environmental protection and pollution-free

The Ceramic particle transportation system is completely closed, which reduces the flying of dust and meets the requirements of environmental protection. This is especially important for those industries that require high environmental protection.

Ceramic particle transportation

3、Ceramic particle transportation characteristics

Ceramic particle transportationit has the characteristics of Convenient for material transportation and recovery., Strong adaptability, Easy to use, High degree of automation and The failure rate is low，Cheap and high quality。

Ceramic particle transportation

4、Ceramic particle transportation structure

The Ceramic particle transportation structure is introduced as follows:

1. Air source device

The air source device is the power core of the Ceramic particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Ceramic particle transportation system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Ceramic particle transportation

5、Ceramic particle transportation display

High-definition pictures of reliable Ceramic particle transportation at a glance。

Ceramic particle transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Introduction of Ceramic particle transportation characteristics

Ceramic particle transportationFlexible pipeline layout,Easy maintenance,versatility,Quantitative transportation,Long conveying distance，is a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，It has a wide range of uses, including Reduce pollution, Long-distance and multipoint transportation, Long distance transportation, Process assistance and material handling，is a kind of Ceramic particle transportation manufactured by hyde。

Ceramic particle transportation

Ceramic particle transportationit is widely used in power, metallurgy, logistics, cast and grain processing，Commonly used inMulti-point transportation,Heating, cooling and drying,Process assistance,Long-distance and multipoint transportation,Bulk material transportation and so on，it has the functions of material handling, Automatic control, Physical processing assistance, Environmental protection and pollution-free and Automatic control。