What is a Sawdust particle pneumatic conveying? Introduction to the advantages and characteristics of pneumatic conveying functions

Sawdust particle pneumatic conveyingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，it is widely used in metallurgy, build a ship, environmental protection, medicine, build a ship and other industries，the advantage is The material is completely closed in the whole conveying process.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、PLC intelligent control, high degree of automation and simple operation.、In the conveying process, various technological operations can be carried out at the same time.。The following is to introduce the Sawdust particle pneumatic conveying:

1、Brief introduction of Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyingIt uses air energy to continuously convey powder and bulk materials.，Easy to use,Reliable operation,Safe and reliable,Convenient for material transportation and recovery.,Centralized transportation。

Sawdust particle pneumatic conveying

2、Sawdust particle pneumatic conveying use

The purpose of Sawdust particle pneumatic conveying is introduced as follows:

1. Long-distance and multipoint transportation

The Sawdust particle pneumatic conveying system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Sawdust particle pneumatic conveyings have important application value in large factories and cross-regional material transportation.

2. cut down on energy consumption

Although the power consumption of the Sawdust particle pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. Dust removal and purification

The Sawdust particle pneumatic conveying system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

4. Adapt to complex environment

The Sawdust particle pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Sawdust particle pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Sawdust particle pneumatic conveying pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Sawdust particle pneumatic conveying

3、Introduction of Sawdust particle pneumatic conveying characteristics

Sawdust particle pneumatic conveyingthe main features are Easy to realize automation, be of simple construction, Flexible transmission line, High degree of automation and It is convenient to realize mechanization，multifunctional, with functions such as Closed conveying, Physical processing assistance, Environmental protection and pollution-free, Explosion-proof involves and Automatic control，Widely used inMulti-point transportation,material handling,Reduce pollution,cut down on energy consumption,Dust removal and essence and so on，widely used in chemical plant, heat-engine plant, building materials, chemical industry, machine building and other fields，customizable。

Sawdust particle pneumatic conveying

4、Sawdust particle pneumatic conveying performance advantage

Sawdust particle pneumatic conveyings have the following advantages.

1. Wide application range

Sawdust particle pneumatic conveyings are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the Sawdust particle pneumatic conveying system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

2. Multi-point to multi-point transportation

The Sawdust particle pneumatic conveying system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. structure

Sawdust particle pneumatic conveying has simple structure and convenient operation.

4. Convenient maintenance and easy automation.

The Sawdust particle pneumatic conveying system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

5. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

Sawdust particle pneumatic conveying

5、Sawdust particle pneumatic conveying structure

The Sawdust particle pneumatic conveying structure is introduced as follows:

1. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

2. Air source device

The air source device is the power core of the Sawdust particle pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. control system

The control system is the "brain" of the Sawdust particle pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Sawdust particle pneumatic conveying

6、Introduction of advantages of Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyings have the following advantages.

1. High conveying efficiency

The Sawdust particle pneumatic conveying system can realize the direct transportation of bulk materials without additional packaging and loading and unloading processes, thus significantly improving the transportation efficiency and reducing the cost of packaging, loading and unloading transportation.

2. Environmental protection and pollution-free

Because the Sawdust particle pneumatic conveying is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

3. High degree of automation

Sawdust particle pneumatic conveyings can realize the automation of transportation process through program control and automation technology. In the whole transportation process, there is no need for manual intervention, and the degree of automation is very high.

4. Multiple process operations can be carried out at the same time

While conveying materials, the Sawdust particle pneumatic conveying system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling, etc., which improves production efficiency and added value of products.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Sawdust particle pneumatic conveying occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

Sawdust particle pneumatic conveying

Sawdust particle pneumatic conveyingmultifunctional, with functions such as Physical processing assistance, material handling, Environmental protection and pollution-free, Automatic control and Explosion-proof involves，it is widely used inplastic,environmental protection,logistics,pharmaceutical factory,power and other industries，the product looks atmospheric.。