What is a Transport of negative electrode material particles? Introduction to the advantages and characteristics of pneumatic conveying system functions

Transport of negative electrode material particlesis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，it is mainly composed of Conveying pipeline system, control system, Air source system, control system and delivery system，productThe structure is novel, special, advanced, reasonable and scientific.，the advantage is Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the conveying process, various technological operations can be carried out at the same time.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、Materials are transported in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.，super quality and competitive price。

1、Brief introduction of Transport of negative electrode material particles

Transport of negative electrode material particlesIt uses air energy to continuously convey powder and bulk materials.，Mainly used forLong-distance and multipoint transportation,material handling,Multi-point transportation,Dust removal and essence andProcess assistance，at work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

Transport of negative electrode material particles

2、Transport of negative electrode material particles advantage

The advantages of Transport of negative electrode material particles are as follows:

1. Various process operations can be realized.

In the process of conveying, the Transport of negative electrode material particles system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

2. High conveying efficiency and low cost.

Can transport materials quickly and in large quantities.

3. Convenient maintenance and easy automation.

The Transport of negative electrode material particles system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

4. energy saving and environmental protection

The conveying process is carried out in a closed pipeline, which effectively prevents dust from flying and escaping, reduces environmental pollution, improves the working environment and is conducive to protecting the health of production personnel.

5. High degree of automation

Transport of negative electrode material particless can realize the automation of transportation process through program control and automation technology. In the whole transportation process, there is no need for manual intervention, and the degree of automation is very high.

Transport of negative electrode material particles

3、Structural advantages of Transport of negative electrode material particles

The Transport of negative electrode material particles has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Air source device

The air source device is the power core of the Transport of negative electrode material particles system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

4. control system

The control system is the "brain" of the Transport of negative electrode material particles system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Transport of negative electrode material particles system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

Transport of negative electrode material particles

4、Transport of negative electrode material particles introduction video

You can buy Transport of negative electrode material particles according to your needs and show you product videos.。

Transport of negative electrode material particles

As you can see from the live video.，hyde it has the functions of material handling, Closed conveying, Explosion-proof involves, Environmental protection and pollution-free and material handling。

5、Transport of negative electrode material particles field real shot

hyde powder Transport of negative electrode material particlesthe product looks atmospheric., the picture is taken.。

Transport of negative electrode material particles

Note: All the pictures in this article were taken by hyde manufacturer.。

Transport of negative electrode material particlesIt is mostly used in Long distance transportation, cut down on energy consumption, material handling, Bulk material transportation, Long-distance and multipoint transportation, Mixing and classification and so on，is a Transport of negative electrode material particles。