Introduction to Pneumatic conveying of clay ash, Powder conveying advantages, characteristics and principles

Pneumatic conveying of clay ashis a reliable material conveying equipment for conveying powdery materials under high pressure.。

1、Brief introduction of Pneumatic conveying of clay ash

Pneumatic conveying of clay ashis a method of conveying materials through pipelines by using air flow with a certain speed.，at work,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，it is an ideal choice for customers to buy Pneumatic conveying of clay ash。

Pneumatic conveying of clay ash

2、Structural characteristics of Pneumatic conveying of clay ash

The Pneumatic conveying of clay ash has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. control system

The control system is the "brain" of the Pneumatic conveying of clay ash system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Pneumatic conveying of clay ash

3、Functional advantages of Pneumatic conveying of clay ash

Pneumatic conveying of clay ashs have the following advantages.

1. High conveying efficiency and low cost.

The Pneumatic conveying of clay ash system uses gas to convey materials, which has high conveying speed and capacity and can realize continuous and efficient transportation.

2. Multi-point to multi-point transportation

The Pneumatic conveying of clay ash system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

3. Save space

Pneumatic conveying of clay ash equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. energy saving and environmental protection

In the process of Pneumatic conveying of clay ash opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

5. Low maintenance cost

Although the initial investment of Pneumatic conveying of clay ash system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

Pneumatic conveying of clay ash

4、Advantages of Pneumatic conveying of clay ash principle

Pneumatic conveying of clay ashat the start of the operation,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，High degree of automation,No secondary pollution,Low energy consumption,versatility,High production efficiency，widely used in pharmaceutical factory, chemical plant, cast, environmental protection, transportation and other fields，The overall structural design is relatively simple and compact.，it mainly includes dust pelletizing system, delivery system, Bunker system, control system and Air source system，the product looks beautiful.。

Pneumatic conveying of clay ash

5、Pneumatic conveying of clay ash price consultation

The Pneumatic conveying of clay ash price is introduced as follows:

1. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. Manufacturer's strength

Our company's expected profit value of Pneumatic conveying of clay ash is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Pneumatic conveying of clay ash is relatively low.

3. model

Because the specifications and models of products are different, their specifications and configurations are not the same. As we all know, the cost of products with high configuration will be higher, and vice versa, because there is a close relationship between product sales price and specifications and models.

4. company strength

hyde is a self-produced and self-sold Pneumatic conveying of clay ash, and has rich experience in the production and manufacturing of Pneumatic conveying of clay ash. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

5. product costs

When it comes to cost, I believe everyone has heard the saying "You get what you want for a price", which shows that the upfront cost of a product is directly proportional to its value. The upfront cost is high, the value is high, the quality is good, and the price is naturally high. The less the cost is, the lower the price is, and the quality is not good.

Pneumatic conveying of clay ash

6、company profile

hyde powder is a strong and professional Pneumatic conveying of clay ash manufacturer, with advanced Pneumatic conveying of clay ash production technology and rich production experience. It will not only provide users with Pneumatic conveying of clay ash with energy saving and environmental protection, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

hyde

Pneumatic conveying of clay ashthe advantage is In the conveying process, various technological operations can be carried out at the same time.、The conveying system is closed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、Closed pipeline transportation，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Multi-point feeding and multi-point discharging are possible.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.，is a popular Pneumatic conveying of clay ash。