Introduction to Micro powder conveying system, introduction to pneumatic conveying advantages and characteristics

Micro powder conveying systemIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，it can be used in transportation, metallurgy, chemical plant, grain processing, logistics and other industries，Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.，The conveying system is closed.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as grade.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、Can be transported from point to point or from point to point, and realize long-distance operation.、Can realize the transportation of materials in a closed pipeline.，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.，is a Micro powder conveying system。

1、Brief introduction of Micro powder conveying system

Micro powder conveying systemis an efficient and environment-friendly way to transport materials by using the energy of airflow.，multifunctional, with functions such as Environmental protection and pollution-free, Environmental protection and pollution-free, material handling, Automatic control and Explosion-proof involves，the main structure includes control system, delivery system, dust pelletizing system, Bunker system, Bunker system and so on。

Micro powder conveying system

2、Micro powder conveying system video detail

The following is the live video of Micro powder conveying system designed and produced by hyde powder for users, from which we can see the the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as dust.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、The conveying system is closed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation. of hyde powderMicro powder conveying system.。

Micro powder conveying system

As you can see from the live video.，hyde in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。

3、Micro powder conveying system principle

Micro powder conveying systemat the start of the operation,Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，multifunctional, with functions such as Physical processing assistance, Closed conveying, Closed conveying, material handling and Automatic control。

Micro powder conveying system

4、Micro powder conveying system structure

The Micro powder conveying system structure is introduced as follows:

1. Air source device

The air source device is the power core of the Micro powder conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Micro powder conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

5. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

Micro powder conveying system

5、Micro powder conveying system price concessions

The Micro powder conveying system price is introduced as follows:

1. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

2. Manufacturer's strength

The nature of the manufacturer can also greatly affect the price of the Micro powder conveying system. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. Parameter size

hyde powder Micro powder conveying system has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. hyde Regularly launch various preferential activities

5. Self quality

Quality is the key factor to determine the price. A high-quality product requires a lot of manpower, material resources and raw materials, so the manufacturing cost of the product is high. Therefore, the price of high-quality products is high. On the contrary, the price of Micro powder conveying system is low.

Micro powder conveying system

6、Company service

hyde manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

hyde

Micro powder conveying systemthe main features are Flexible layout, Flexible pipeline layout, Various processes, easy installation and Flexible transmission line，the product looks atmospheric.。