Introduction to Suction type pneumatic ash silo pump, bin pump advantages, characteristics and principles

Suction type pneumatic ash silo pumpis a kind of equipment used for pneumatic conveying.，the advantage is Adopt fully sealed and pollution-free transportation mode, which meets the requirements of environmental protection. During transportation, materials will not leak, thus avoiding environmental pollution and material waste. Compared with other transportation modes, the energy consumption of the Suction type pneumatic ash silo pump is relatively low, which is helpful for energy saving and emission reduction.、Suitable for a variety of material types, such as powder, granular and other loose materials. The transportation distance is long, which can meet the transportation needs of different distances and different terrains. Suction type pneumatic ash silo pumps of different models and specifications can be customized according to specific needs to adapt to different application scenarios.、The operation mode is fully enclosed and automatic, and it can also be operated manually.、Compact structure, easy installation and maintenance. The wear and tear of all parts can be checked regularly, and the damaged parts can be replaced in time to ensure the normal operation of the equipment. The maintenance cost is relatively low, which is helpful to improve the economy and service life of the equipment.、The unloading mode is flexible, and it can be unloaded at a single point or at multiple points.，is developed and improved by hyde powder。

1、Brief introduction of Suction type pneumatic ash silo pump

Suction type pneumatic ash silo pumpis a kind of equipment used for pneumatic conveying.，the product looks atmospheric.，widely used in Building materials industry, electricity industry, food service industry, Cement industry, chemical lines and other fields，The overall structural design is simple, diverse and beautiful.，generally, it is composed of pump body, intake valve, fluidizer, pump body, control system and other major components，multifunctional, with functions such as environmental protection and dust removal, pneumatic ash conveying, material handling, particle transport and pneumatic transport。

Suction type pneumatic ash silo pump

2、Suction type pneumatic ash silo pump advantage

The advantages of Suction type pneumatic ash silo pump are as follows:

1. Environmental protection and energy saving

Adopt fully sealed and pollution-free transportation mode, which meets the requirements of environmental protection. During transportation, materials will not leak, thus avoiding environmental pollution and material waste. Compared with other transportation modes, the energy consumption of the Suction type pneumatic ash silo pump is relatively low, which is helpful for energy saving and emission reduction.

2. Strong adaptability

Suitable for a variety of material types, such as powder, granular and other loose materials. The transportation distance is long, which can meet the transportation needs of different distances and different terrains. Suction type pneumatic ash silo pumps of different models and specifications can be customized according to specific needs to adapt to different application scenarios.

3. High reliability

Made of high-quality materials and advanced technology, it has high reliability and durability. In the harsh working environment, it can still maintain good working performance and ensure the continuity and stability of material transportation.

4. Simple operation

The operation is simple and convenient, and usually adopts automatic control mode, which is suitable for the actual needs of engineering. Automatic control can be realized by programming, which reduces manual operation and labor intensity.

5. Convenient maintenance

Compact structure, easy installation and maintenance. The wear and tear of all parts can be checked regularly, and the damaged parts can be replaced in time to ensure the normal operation of the equipment. The maintenance cost is relatively low, which is helpful to improve the economy and service life of the equipment.

Suction type pneumatic ash silo pump

3、Structural advantages of Suction type pneumatic ash silo pump

The Suction type pneumatic ash silo pump has the following structure

1. level-sensing device

Used to detect the material level in the pump body. Common level gauges include capacitive level gauges and ultrasonic level gauges. Through the material level gauge, the feeding amount can be accurately controlled to avoid the situation that the pump body is too full or the material is insufficient.

2. level-sensing device

Used to detect the material level in the pump body. Common level gauges include capacitive level gauges and ultrasonic level gauges. Through the material level gauge, the feeding amount can be accurately controlled to avoid the situation that the pump body is too full or the material is insufficient.

3. pump body

The core part of the Suction type pneumatic ash silo pump is used to contain materials. The pump body is generally a cylindrical pressure vessel, and its material is usually carbon steel or stainless steel to ensure sufficient strength to withstand internal pressure. In the design, the volume of the pump body should be considered, which will be determined according to the actual delivery requirements.

4. Air intake device

Comprises an air inlet pipeline, an air inlet valve and other components. The air inlet pipe is used to introduce compressed air into the pump body, and the air inlet valve can control the flow and pressure of compressed air. The performance of air intake device directly affects the conveying speed and efficiency of materials.

5. Feed valve and discharge valve

The feed valve is used to control the material entering the pump body, and the discharge valve is used to control the material discharging from the pump body. These valves are usually ball valves, butterfly valves or gate valves, which require good sealing to prevent material leakage and gas leakage.

Suction type pneumatic ash silo pump

4、Suction type pneumatic ash silo pump principle

The principle of Suction type pneumatic ash silo pump is introduced as follows:

1. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

2. Discharge stage

After the material is transported to the destination, it is discharged through the discharge valve. The destination can be a silo, a reaction kettle and other equipment for receiving materials. After discharging, the whole Suction type pneumatic ash silo pump system can enter the next feeding-conveying-discharging cycle.

3. Feeding stage

The feed valve of the Suction type pneumatic ash silo pump is opened, and the material enters the pump body of the Suction type pneumatic ash silo pump under the action of gravity or other feeding devices. In this process, the pressure inside the pump body is basically the same as the external atmospheric pressure to ensure the smooth entry of materials.

4. Conveying stage

When the material in the pump body reaches a certain amount, the feed valve is closed. Then, introduce compressed air into the pump body. The compressed air expands rapidly in the pump body, so that the material is fully mixed with the air, and the material is pushed along the conveying pipeline under the action of air pressure.

5. Discharge stage

After the material is transported to the destination, it is discharged through the discharge valve. The destination can be a silo, a reaction kettle and other equipment for receiving materials. After discharging, the whole Suction type pneumatic ash silo pump system can enter the next feeding-conveying-discharging cycle.

Suction type pneumatic ash silo pump

5、Suction type pneumatic ash silo pump picture

HD picture of hyde Suction type pneumatic ash silo pump,strong adaptability。

Suction type pneumatic ash silo pump

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、hyde workshop picture real shot

The finished products of the Suction type pneumatic ash silo pump factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

hyde powder

The finished products of the Suction type pneumatic ash silo pump factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Suction type pneumatic ash silo pumpit is widely used in grain processing, chemical lines, Building materials industry, Metallurgical industry and electricity industry，When the material enters the pump body and is full, it is gasified to make the material form a fluidized state and smoothly enter the mixing chamber. At the same time, the compressed air is ejected at high speed through the jet nozzle and fully mixed with the fluid material. The high-speed airflow drives the material to pass through a specific pipeline, which converts the kinetic energy of compressed air into pressure energy, and at the same time, the air and the material are mixed again, so as to improve the speed of the material and make it move forward along the conveying pipeline, thus achieving the purpose of conveying powdery materials.。